LG Electronics XBV713 Moisture Condensation, About the Symbol Display, Symbol Used in this Manual

Page 5

Introduction

To ensure proper use of this product, please read this owner’s manual carefully and retain it for future reference.

This manual provides information on the operation and maintenance of your unit. Should the unit require service, contact an authorized service location.

Moisture Condensation

Never operate the unit immediately after moving it from a cold location to a warm location. Leave it unplugged for two or three hours without operating it. If you use the unit in such a situation, it may damage discs/tapes and internal parts.

About the Symbol Display

” may appear on your TV display during opera- tion and indicates that the function is not permitted by this unit or the disc.

Notes on Discs

Handling Discs

Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.

Introduction

Symbol Used in this Manual

Note: Indicates special notes and operating fea- tures.

Tip: Indicates tips and hints for making the task easier.

A section whose title has one of the following symbols is applicable only to the disc represented by the symbol.

ALL

All discs listed below

DVD

DVD and finalized DVD±R/RW

ACD

Audio CDs

MP3

MP3 files

WMA

WMA files

Storing Discs

After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.

Cleaning Discs

Fingerprints and dust on the disc can cause poor pic- ture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.

Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.

5

Image 5
Contents V271P-M.NA1ULZENG Installation and Operating Guide WarrantyRegulatory Information FCC Part Important Safety Instructions Contents Moisture Condensation About the Symbol DisplaySymbol Used in this Manual Regional Code Types of Playable DiscsFront Panel PAUSE/STEP Remote ControlAbout the Remote Control DVD Exclusive OUT Rear PanelOptional TV Connections Basic TV ConnectionsDigital Multi-channel sound Accessory Audio/Video A/V Connections to unitConnection to an Amplifier General Operation Initial Settings VCRAudio Mode Checking or Erasing the Timer ProgramProgram Priority Function OSDGeneral Operation Initial Settings DVDDisplaying Disc Information on-screen Menu Language Display ModeDisc Audio / Subtitle / Menu TV AspectDolby Digital / DTS / Mpeg PasswordSample Freq. Frequency Dynamic Range Control DRCE. Black Level Expansion Area CodeVCR Tape Playback Basic Instructions External Timer RecordingVCR Tape Recording Recording from External Components Instant Timer RecordingChecking the Recording Time Extending the Recording TimeOn-Screen Display VCR Copying from DVD to VCRVHS Quasi Playback Sqpb Additional VCR InformationVCR Auto Play System Buttons Operations Discs General featuresAdditional features ID3 TAG Playing an Audio CD or MP3/WMA fileProgrammed Playback Viewing a Jpeg file Playing a DVD VR format Disc Maintenance and ServiceReference Symptom Cause Correction TroubleshootingRemote Control Specifications HOW Service is Handled Warranty PeriodFor Warranty Service Customer INTER-ACTIVE Center Numbers