LG Electronics XBV713 Checking or Erasing the Timer Program, Program Priority, Function OSD

Notes:

•If you make a mistake or want to change a set- ting, use v to select the option and correct it using b / B.

•If the program preset time is past, the “PAST TIME PROGRAMMED” message appears on the TV screen. Return to the incorrect program and program it with the correct time.

•If you enter a past date, the timer recording will be performed on that date of the next year.

•If the power fails or the unit is unplugged the clock and timer settings are kept in memory for only 3 seconds. Otherwise you must reset the clock and timer.

•If the tape indicator is blinking, no tape is loaded.

•When you are playing DVD at programmed Recording time, the unit automatically change to VCR mode and start recording.

•The unit will automatically power off when Timer Recording ends.

Checking or Erasing the Timer Program

Programming can be checked whenever the unit is turned on.

1.Press SETUP/MENU and the main menu appears.

2.Use v / V to choose the PROGRAM menu and press ENTER (OK).

3.Use b / B to select a program you want to check or erase. To erase the program, press CLEAR.

4.Press SETUP/MENU to return to the TV screen.

Program Priority

If the recording start and end times of preset programs overlap on the same day (see the example), the second program is not recorded until the first is finished.

In this example, the first part of program numbers 2 and 3 are not recorded.

SETUP

FUNCTION OSD

The on-screen display can be turned on or off.

AUDIO MODE

The unit has two separate audio playback systems, the high quality VHS Hi-Fi system and standard NORMAL mono system. The same audio is generally recorded on both systems. The VHS Hi-Fi system plays on separate (left and right) channels, and the NORMAL system plays monaural sound. The normal track is always played so the cassette can be played on a unit that does not have VHS Hi-Fi.

AUDIO OUTPUT (STEREO/LEFT/RIGHT)

Used during playback [when AUDIO MODE (HI-FI/NORMAL) is in HI-FI position] for selecting the audio output signals from the AUDIO OUT terminals (L ch and R ch). This display setting should normally be left in the stereo position, so that when a stereo tape is played, the stereo sound will be heard through the left and right channels. If a mono tape is played and the audio output is set to stereo, the same mono sound will be heard from both left and right channels.

Preparation

13