Programmed Playback
The program function enables you to store your favourite tracks from any disc in the player memory. A program can contain 30 tracks.
1.Insert a disc.
Audio CD or MP3/WMA Discs. AUDIO CD or MUSIC menu appears.
2.Press PROGRAM.
The E mark will appear to the right of the word “Program” on the right side of the menu screen.
Audio CD Program Menu
MP3/WMA Program Menu
Note:
Press PROGRAM again, the E mark will disappear to
exit the Program Edit mode.
Video CD: Press PROGRAM while playback is stopped. The program menu appears. Press PROGRAM again to exit the menu.
Note:
On a Video CD with PBC, you must set PBC to Off on the setup menu to use the this function (See “PBC” on page 21).
3.Select a track on the “List”, then press ENTER to place the selected track on the “Program” list. Repeat to place additional tracks on the list.
4.Press B.
Select the track you want to start playing on the “Program” list.
5.Press N (PLAY) or ENTER to start. Playback begins in the order in which you programmed the tracks. Playback stops after all of the tracks on the “Program” list have played once.
6.To resume normal playback from programmed playback, select a track of AUDIO CD (or MUSIC) list and then press N (PLAY).
Repeat Programmed Tracks
1.Press REPEAT when playing a disc. The repeat icon appears.
2.Press REPEAT to select a desired repeat mode.
•TRACK: repeats the current track
•ALL: repeats all the tracks on programmed list.
•Off (No display): does not play repeatedly.
Note:
If you press > once during Repeat Track playback, the
repeat playback will be cancelled.
Erasing a Track from “Program” List
1.Use B / v / V to select the track that you wish to erase from the Program list.
2.Press CLEAR. Repeat to erase additional tracks on the list.
Erasing the Complete Program List
Use B / v / V to select “Clear All” in the “Program” list, then press ENTER.
Note:
The programs are also cleared when the disc is removed.
Operation
35