LG Electronics LDX-514 owner manual Optional TV Connections

Page 13

RF coaxial connection

Optional TV Connections

Connect the RF.OUT jack on the DVD+VCR to the

These connections support only DVD playback. The

antenna in jack on the TV using the supplied 75-ohm

tuner and VCR still output through the RF.OUT (R) or

Coaxial Cable (R).

DVD/VCR OUT (A, V) jacks.

 

How to set the DVD+VCR’s RF output channel

1.When the DVD+VCR is turned off, press and hold CH (V/v) on the front panel for more than five seconds. “RF03” or “RF04” appears in the display window.

2.Press CH (V/v) to change the RF output channel (RF03 or RF04). Tune the TV to this channel.

3.Turn off the DVD+VCR.

Audio/Video connection

1.Connect the DVD/VCR VIDEO OUT jack on the DVD+VCR to the video in jack on the TV using the video cable supplied (V).

2.Connect the Left and Right DVD/VCR AUDIO OUT jacks on the DVD+VCR to the audio left/right in jacks on the TV (A1) using the supplied audio cables.

Notes:

•If you use this connection, set the TV’s source selector to VIDEO.

•For DVD/VCR VIDEO OUT jack connection, resolution must be set to 480i or 480p by pressing RESOLUTION on the front panel, however DVD/VCR VIDEO OUT is always at 480i standard resolution.

•HDMI mode must be set to OFF for DVD/VCR VIDEO OUT jack connection.

S-Video connection

Connect the S-VIDEO OUT jack on the DVD+VCR to the S-Video in jack on the TV using the optional S-Video cable (S).

Notes:

•For S-Video connection, resolution must be set to 480i or 480p by pressing RESOLUTION on the front panel, however S-VIDEO OUT is always at 480i standard resolution.

•HDMI mode must be set to OFF for S-Video connection.

Component Video / Progressive Scan connection

If your television is a high-definition or “digital ready” television, you may take advantage of the DVD+VCR’s progressive scan output for the highest video resolution possible.

Connect the COMPONENT/PROGRESSIVE SCAN VIDEO OUT jacks on the DVD+VCR to the corre- sponding in jacks on the TV using an optional Y Pb Pr cable (C).

Notes:

•You can change the resolution (480i, 480p, 720p, 1080i) for the component/progressive scan video output by pressing RESOLUTION on the front panel.

•For 720p and 1080i resolution, only non-copy protected discs can be played back. If the disc is copy protected, it will be auto down-scaling to 480p resolution.

•HDMI mode must be set to OFF for Component video connections.

•Progressive scan does not work with the analog video connections (yellow VIDEO OUT jack and S-VIDEO OUT jack).

Audio connection

Connect the Left and Right AUDIO OUT jacks of the DVD+VCR to the audio left/right in jacks on the TV using the supplied audio cables (A2).

Preparation

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents DVD Player Video Cassette Recorder Serial Number Important Safety Instructions Contents Symbol Used in this Manual About the Symbol DisplayMoisture Condensation Region code Types of Playable DiscsSelecting the Viewing Source Mpeg DVD ±R / DVD ±RWMP3 WMAAbout the Remote Control Card useable on this unit Using Memory CardBattery installation Do not extract the memory card in operatingFront Panel Lock function Remote ControlBackward / Forward m/M Rear Panel Basic TV Connections Connecting an Antenna or Cable TVAntenna Cable TVOptional TV Connections About Hdmi Hdmi ConnectionConnection to an Amplifier Accessory Audio/Video A/V Connections toDigital Multi-channel sound General Operation Initial Settings VCRAuto Clock Set Manual Clock SetTo Add or Erase Channels Auto Channel ProgrammingMenu Language Initial Settings DVDDisc Audio/Subtitle/Menu DVD TV Aspect DVD Display Mode DVDDolby Digital/DTS/MPEG DVD Sample Freq. Frequency DVDLock Parental Control Password Security CodeRating DVD Area Code DVDAuto Play DVD PBC, Auto Play, and B.L.E. settings can be changedE. Black Level Expansion DivX Registration Code DivXVCR Tape Playback Slow Motion VHS Hi-Fi Stereo MTS BroadcastCM Skip Commercial Skip Hi-Fi Stereo Audio SoundVCR Tape Recording Timer RecordingTo pause the recording To record one TV program while watching anotherProgram Priority Checking or Erasing the Timer ProgramRecording from External Components Instant Timer RecordingChecking the Recording Time Extending the Recording TimeOn-Screen Display VCR Copying from DVD to VCRVCR Auto Play System Additional VCR InformationVHS Quasi Playback Sqpb Easy InformationGeneral Features Playback SetupPlaying a DVD or Video CD Marker Search DVD VCD Time Search DVD VCD DivXRepeat 3D Surround DVD VCD DivXSpecial DVD Features On-Screen Display DVD Maintenance and ServiceAudio CD Playing an Audio CD or MP3/WMA FilesPlay or Enter and playback starts MP3 / WMAAudio CD and MP3 / WMA Disc Features Repeat Programmed Tracks Programmed PlaybackErasing a Track from Program List Erasing the Complete Program ListViewing a Jpeg Files Playing a DVD VR format Disc Playing a DivX Movie FileControlling other TVs with the remote Controlling Your TV with the Supplied RemoteCode numbers of controllable TVs By pressing You canChoose a area code from this list ReferenceSymptom Cause Correction TroubleshootingSecurely Power of the equipment connected DVD+VCR VCR Specifications SpecificationsDVD Specifications GeneralFor Warranty Service Warranty Period HOW Service is HandledCustomer INTER-ACTIVE Center Numbers
Top Page Image Contents