Connecting an Antenna or Cable TV
aAntenna:
Disconnect the antenna from the rear of the TV and identify the antenna cable. If it is a round 75 ohm coaxial cable connect it directly to the jack marked ANT.IN on your DVD+VCR. If your antenna cable is flat connect it to a
bCable TV:
If your cable connection has no converter or descrambler, unscrew the cable from your TV and attach it to the ANT.IN jack on the DVD+VCR. If a converter is required connect a coaxial cable from the wall jack to the IN connector on the converter, and a coaxial cable from the OUT connector on the convert- er to the ANT.IN on your DVD+VCR. This cable hookup permits both TV and DVD+VCR operation.
To view or record a CATV channel
1.Tune the TV to the DVD+VCR output channel (CH 3 or 4).
2.Set the DVD+VCR channel selector to the cable output channel. (Example: CH3)
3.Select a channel using the cable converter.
Notes:
•With this connection, you cannot record one program while viewing another.
•If you are using a cable box to tune channels, it is not necessary to do Auto Channel Set.
Basic TV Connections
Make one of the following connections, depending on the capabilities of your TV.
a | Antenna | Antenna | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Rear of TV
ANTENNA | VIDEO | AUDIO INPUT | |
INPUT | INPUT |
|
|
|
| L | R |
R V A1
OR | OR | Rear of DVD+VCR |
| C | A2 |
b | Rear of DVD+VCR |
|
|
| |
| Pr Pb Y | RL |
| COMPONENT/PROGRESSIVE SCAN | AUDIO INPUT |
| VIDEO INPUT |
Rear of TV
12