Lock (Parental Control)
LOCK
RatingUnlock
PasswordNew
Country Code | USES |
Move Select
RATING DVD-V
Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative.
The parental control feature allows you to block access to scenes below the rating you input, thereby preventing your children from being able to view material you believe is unsuitable.
1.Select “Rating” on the LOCK menu then press B.
2.To access the Rating, Password and Country Code features, you must input the
Input a
3.Select a rating from 1 to 8 using the v / V buttons.
Rating
Unlock
If you select unlock, parental control is not active and the disc plays in full.
Notes:
If you set a rating for the receiver, all disc scenes with the same rating or lower are played. Higher rated scenes are not played unless an alternate scene is available on the disc. The alternative must have the same rating or a lower one. If no suitable alternative is found, playback stops. You must enter the
4.Press ENTER to confirm your rating selection, then press SETUP to exit the menu.
PASSWORD (SECURITY CODE)
You can enter or change password.
1.Select Password on the LOCK menu then press B.
2.Follow step 2 as shown left (Rating). “Change” or “New” is highlighted.
3.Enter the new
4.Press SETUP to exit the menu.
If you forget your Security Code
If you forget your security code you can clear it using the following steps:
1.Press SETUP to display the Setup menu.
2.Input the
3.Enter a new code as described above.
COUNTRY CODE DVD-V
Enter the code of the country/area whose standards were used to rate the DVD video disc, based on the list in the reference chapter.
1.Select “Country Code” on the LOCK menu then press B.
2.Follow step 2 as shown left (Rating).
3.Select the first character using v / V buttons.
4.Press ENTER and select the second character using v / V buttons.
5.Press ENTER to confirm your country code selection.
System Setup
27