Tuning Stations Manually
1.Press FM/AM on the remote control until the frequency band appears on the display and TV screen.
2.Use FM/AM on the remote control to select the desired band.
3.Use 4 TUNING 3 on the front panel or press 1 and 2 on the remote control to tune in the desired station.
FOR YOUR REFERENCE
To turn the radio off
Press POWER to turn the Combi Receiver off or select another function mode (DVD, VCR, L 1 or L 2).
Tuning Stations Automatically
Hold down 4 TUNING 3 on the front panel for 1 or 2 seconds, and the next station is searched for automatically.
Note:
The search may not tune in or stop at a station with a very weak signal.
Mute
1.Press MUTE to remove the sound.
You can mute your unit in order, for example, to answer the telephone, “MUTE” indicator appears in the display.
2.Press MUTE again to restore sound.
Labeling Stations
You can enter a name of up to 5 characters for preset stations. The names (for example, “ABCD”) appears in the system’s Display window when a station is selected.
Note that no more than one name can be entered for each preset station.
1. Press 2 to move to the station name column.
- - - - - - - RADIO - - - - - - - 6/10
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
FM/AMTUNING 
MEMORY/CLEAR
2.Use the 3/4 buttons to select the character then use the 1 /2 buttons to shift to the next or previous character.
3.Press MEMORY/ENTER to confirm the station name.
4.Press MEMORY/ENTER on the remote control.
The station name is stored.
Operation
49