LG Electronics LHX-557 owner manual Speaker Setup, Size

5.1 Speaker Setup

This chapter includes important reference information to help you set your Home Theater System.

Speaker Setup

Make the following settings for the built-in 5.1 channel surround decoder.

1.Press SETUP. The setup menu appears.

2.Use v / V to select the AUDIO option then press B to move to the second level.

3.Use v / V to select the Speaker Setup option then press B to move to the third level. “Select” is highlighted.

4.Press MEMORY/ENTER and 5.1 Speaker Setup menu appears.

AUDIO

Speaker	Front L
Size
	Small
Volume		dB
	0
Distance		m(ft)
	0.6(2)
Test
	Off
	Select	Move	Return	Enter

5.Use b / B to select the desired speaker.

6.Adjust options using v / V / b / B buttons.

7.Press ENTER to confirm your selection. Returns to the previous menu.

Speaker selection

Select a speaker that you want to adjust. (Front speakers (Left), Center Speaker, Front speakers (Right), Rear speakers (Right), Rear speakers (Left), or SubWoofer)

Note:

Certain speaker settings are prohibited by the Dolby Digital licensing agreement.

Size

Since the speaker settings are fixed, you cannot change the settings.

Volume

Press b / B to adjust the output level of the selected speaker. (-6dB ~ +6dB)

Distance

If you connected speakers to your Home Theater System, setting the Distance lets the speakers know how far the sound has to travel to reach your set listening point. This allows the sound from each speaker to reach the listener at the same time. Press b / B to adjust the Distance of the selected speaker.

[0.3(1)m(ft) - 6.0(20)m(ft)]

Test

Press b / B to test the signals of each speaker. Adjust the volume to match the volume of test signals memorized in the system.

Front Left (L) → Center → Front Right (R) → Rear Right (R) → Rear Left (L) → SubWoofer

You can adjust the volume during operating the test tone, first use v / V to select Volume or Speaker option then use b / B buttons to select volume or speaker, so that all speaker’s volume is same from the listener’s position.

During operating the test tone, if you adjust the volume, it will be paused in the current speaker channel.

46