RADIO Operation
Presetting the Radio Stations
You can preset 50 stations for FM and AM. Before tuning, make sure that you have turned down the volume.
1.Press FM/AM on the remote control until the frequency band appears on the display and TV screen.
- - - - - - - RADIO - - - - - - - 1/10
AM 530kHz
AM 1720kHz
AM 600kHz
AM 1400kHz
AM 1000kHz
FM/AMTUNING
MEMORY/CLEAR
2.Use 3/4 on the remote control to select the desired Station.
If you select a blank column,
- - - - - - - RADIO - - - - - - - 2/10
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
FM/AMTUNING
MEMORY/CLEAR
3.Press FM/AM on the remote control to select the desired band.
4.Hold down TUNING (4/3) on the remote control for 1 or 2 seconds, and a station is searched for automatically.
5.Press MEMORY/ENTER on the remote control.
The station is stored.
6.Repeat steps 2 to 5 to store other stations.
Listening to the Radio
Preset radio stations in the Combi Receiver memory first (see “Presetting Radio Stations” on the left).
1.Press FM/AM on the remote control until the frequency band appears on the display and TV screen.
The last received station is tuned in.
2.Use 3/4 on the remote control repeatedly to select the preset station you want.
Each time you press the button, the DVD/VCR Receiver tunes in one preset station at a time.
3.Adjust the volume by rotating VOLUME on the front panel or by pressing VOLUME + or - on the remote control repeatedly.
To Clear the Stored Radio Stations
1.Press FM/AM on the remote control until the frequency band appears on the display and TV screen.
- - - - - - - RADIO - - - - - - - 1/10
AM 530kHz
AM 1720kHz
AM 600kHz
AM 1400kHz
AM 1000kHz
FM/AMTUNING
MEMORY/CLEAR
2.Use 3/4 on the remote control to select your desired station.
- - - - - - - RADIO - - - - - - - 2/10
FM 87 . 5MHz
FM 108 . 0MHz
FM 90 . 0MHz
FM 106 . 0MHz
FM 98 . 0MHz
FM/AMTUNING
MEMORY/CLEAR
3.Press CLEAR the remote control to clear the stored radio station.
-- - - - - - RADIO - - - - - - - 6/10
FM 87 . 0MHz
FM/AMTUNING
Note:
While record or record pause mode, the CLEAR function may not be operated.
48