FRONT PANEL CONTROLS
The front panel controls on the RCS 2.2 XP will allow you to access and control all menu settings.
Digital Input Selector | Input Display | Master Volume |
|
| Menu | ||||||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Standby | Mute | Volume Level | Navigation/ |
| Analog Input Selector |
| |
Standby | Use the “STANDBY” button to toggle between Standby mode and ON. |
| The display will indicate Standby mode by displaying a small green light in the left |
| side of the display. When the unit is placed in Standby mode all user settings are |
| saved. |
Master volume | The master volume is controlled by turning the “TacT wheel ” . The green digits |
| on the left side will change as you turn the wheel - this is your master volume level |
| indicator. (The wheel sensitivity, max. volume etc. can be set in the “OPTIONS ” |
Mute | Use the “ MUTE ” button to mute or |
| indicator will switch to |
| while the unit is in Mute mode - the volume level indicator will briefly indicate the |
| level, then switch back to the |
Digital | Press the “ DIGITAL” button to select the digital input. This is a toggle switch, and |
input selector | by pressing it multiple times it will toggle through all of the five digital inputs. The |
| selected input will be displayed in the input display portion of the display. |
Analog | Press the “ANALOG ” button to select the analog input. This is a toggle switch, and |
input selector | by pressing it multiple times it will toggle through all of the four analog inputs. The |
| selected input will be displayed in the input display portion of the display. |
| NOTE: Please note that the optional ADC module is required for analog in- |
| puts. |
Menu | Press the “MENU” button to access the front panel menu system. |
Navigation/Enter | Use the navigational buttons to navigate the options and select with the middle |
| “Enter” button . |
| NOTE: The remote and front panel controls are disabled whenever a Personal |
| Computer is connected and the Room Correction or ParEQ software is run- |
| ning. To enable the remote and front panel controls press and hold down the |
| “DIGITAL” and “ANALOG” input selector simultaneously. |