TacT Audio owner manual AMP menu, Attached to the RCS 2.2 XP

Page 37

Front Panel > Main Menu

AMP menu

The AMP menu is designed to allow the RCS 2.2 XP to interface with the TacT

 

 

line of digital amplifiers. The RCS 2.2 XP can control multiple digital amplifiers.

 

This setting should be ENABLED only if you have a Tact digital amplifier

 

attached to the RCS 2.2 XP.

To change the settings use the “UP” and “DOWN ” navigational buttons to high- light the option and then press the “ENTER” button to change the setting.

If the L & R option is set to DISA BLE, th e Left/Right channel will operate in normal mode. The mater level control will affect both the digital and the ana log output signal.

If the L & R option is set to ENABLE, the master level control has no effect on the Left/Right analot or digital output signal. The Left and Right channel signal will output the maximum signal level, which is equivalent to the 99.9 setting on the volume display. The front panel master level information (relative read out, 0-99.9) will be broadcast to all digital amplifiers connected to the RS232 AUX connector. In this case, volume control is implemented in Tact digital amplifiers.

The same applys to th e SUB L & R option.

For example, one amplifier can be used for main left and right channels and the second one can be used for the left and right subwoofer channels. If two TacT digital amplifiers are connected, both options should be set to ENABLED. If one Tact digital amplifier is connected only one option should be set to ENABLED and the other one should be set to DISABLED. Enable should only be set for the output that uses Tact digital amplifiers.

NOTE: When a TacT digital amplifier is controlled by the RCS 2.2 XP, all of the amplifier’s front panel and IR controls are disabled. Use the RS232 port and/or daisy chain to link the components.

CAUTION: The AMP setting should only be set to ENABLED if you have Tact amplifiers connected to the RCS 2.2 XP. When the AMP option set to ENABLED both the analog and the digital output will output a full level sig- nal regardless of the RCS 2.2 XP master volume setting. If you do not have Tact amplifiers connected to your system you will not be able to control the output level from the RCS 2.2 XP volume control. The output is sent at its maximum level and can result in damage to your speakers.

Tact Audio 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents RCS 2.2 XP Page Tact Audio Page Acknowledgments Table of Contents OFF Unpacking the RCS 2.2 XPIntroduction Modular design Dynamic Room Correction Page Automatic Room Correction RCS-DRC screen Tact Audio ModePage Page Page Page Page Tact Audio AES/EBU XLR RCS 2.2 XP ConnectionsRCS 2.2XP has three digital outputs for subwoofers RCS 2.2 XP Connections RCS 2.2X Connections Input AUX Front Panel Controls Remote Control Down Front Panel Display Output sampling frequency indicator Master Level IndicatorInput sampling frequency indicator RCS 2.2 XP operating modeUse to enables/disables Tact digital amplifier control Mono Mode menuFront Panel Main Menu DOUT-FS menu Each channel can be set to + 0 or inverted Sec option, and then turn the display OFF or dim it to a Comm menu Use this screen to set the 2.2 XP device address Attached to the RCS 2.2 XP AMP menuGain Lock DRC-RCS Lock menuFront Panel Main Menu This parameter CRO option Correction menuFront Panel Correction Menu CRO menu Names menuFront Panel Correction Menu Front Panel Correction Menu Front Panel Parametric EQ Menu Menu Parametric EQFront Panel Parametric EQ Menu Screen TacT Audio, Inc

RCS 2.2 XP specifications

TacT Audio RCS 2.2 XP is a state-of-the-art Room Correction System that enhances audio playback by employing advanced technology to optimize sound quality. It is designed to address common acoustic issues in listening environments, ensuring that you experience your music and movies as the artist intended.

One of the main features of the TacT RCS 2.2 XP is its sophisticated room correction algorithm. This technology analyzes the acoustics of your room and makes real-time adjustments to the audio output. By measuring the room's response at various frequencies, it can compensate for unwanted peaks and dips, resulting in a balanced sound profile. This enables listeners to achieve a high-fidelity experience regardless of room characteristics.

The RCS 2.2 XP includes a high-resolution digital-to-analog converter (DAC), which plays a crucial role in maintaining audio clarity and detail. The device supports multiple digital input formats, ensuring compatibility with various audio sources. The DAC also enhances the overall signal-to-noise ratio, allowing for a cleaner and more dynamic sound.

In addition to its room correction capabilities, the TacT RCS 2.2 XP features a user-friendly interface that allows for easy navigation and customization. Users can adjust settings according to their preferences, tailoring the listening experience to their specific needs. The setup process is simplified with an included measurement microphone that assists in analyzing room acoustics and generating optimal correction profiles.

Connectivity options are extensive, as the RCS 2.2 XP supports both analog and digital inputs. This versatility allows users to integrate the device seamlessly with their existing audio systems. The unit also provides multiple analog outputs, enabling connection to various amplifiers and speaker configurations.

Another noteworthy characteristic is the elegant design of the RCS 2.2 XP. Its sleek appearance not only complements modern audio systems but also reflects the high-quality craftsmanship inherent in TacT Audio products.

Overall, the TacT Audio RCS 2.2 XP stands out as a premier room correction solution. Its combination of advanced technology, intuitive user interface, and high-quality components makes it an ideal choice for audiophiles seeking to elevate their audio experiences. With the RCS 2.2 XP, listeners can enjoy music and movies in a way that is truly faithful to the original recording, free from the limitations imposed by their listening environment.
Top Page Image Contents