TacT Audio RCS 2.2 XP owner manual Front Panel Parametric EQ Menu

Page 46

Front Panel > Parametric EQ Menu

PARAMETRIC EQ This menu is used to control the 12 band parametric equalized. This menu is ac-

menu cessed through the PAR EQ option on the RCS 2.2X ﬁrst screen.

If Par Eq preset is set to BP - bypass the following screen will be displayed:

CAUTION

In this screen only two options are enabled: PRESET and LOCK.

46Tact Audio

Image 46

Contents RCS 2.2 XP Page Tact Audio Page Acknowledgments Table of Contents Unpacking the RCS 2.2 XP OFFIntroduction Modular design Dynamic Room Correction Page Automatic Room Correction Mode RCS-DRC screen Tact AudioPage Page Page Page Page Tact Audio RCS 2.2 XP Connections AES/EBU XLRRCS 2.2XP has three digital outputs for subwoofers RCS 2.2 XP Connections RCS 2.2X Connections Input AUX Front Panel Controls Remote Control Down Front Panel Display Input sampling frequency indicator Master Level IndicatorOutput sampling frequency indicator RCS 2.2 XP operating modeUse to enables/disables Tact digital ampliﬁer control Mode menu MonoFront Panel Main Menu DOUT-FS menu Each channel can be set to + 0 or inverted Sec option, and then turn the display OFF or dim it to a Comm menu Use this screen to set the 2.2 XP device address AMP menu Attached to the RCS 2.2 XPGain Lock menu Lock DRC-RCSFront Panel Main Menu Correction menu This parameter CRO optionFront Panel Correction Menu Names menu CRO menuFront Panel Correction Menu Front Panel Correction Menu Front Panel Parametric EQ Menu Parametric EQ MenuFront Panel Parametric EQ Menu Screen TacT Audio, Inc