LG Electronics RDJT52 1024X768 XGA manual Zoom IN/ OUT, PIP SOURCE, PIP POS., PIP Size, Return

3.ZOOM IN/ OUT

By pressing ZOOM IN +, the center of the picture will be magnified. When the + button is pressed again, the picture is further magnified, up to four times the original size. By pressing ZOOM OUT -, the size of the image is reduced. When the - button is pressed again, the picture is further reduced until it is restored to its original size. To return to the normal display mode, press the RETURN button. (This function can be used in combination with FREEZE. )

4.FREEZE

The image is frozen when FREEZE is pressed. A “Pause” icon will appear in the lower right corner of the screen. To stop the freeze function, press the FREEZE button, RETURN button or SOURCE button (when the input source is switched over during display) again.

5.PIP SOURCE, PIP POS., PIP SIZE

By pressing the PIP-Source, PIP-Pos and PIP-Size buttons, you can enable the PIP (Picture In Picture) function and choose the position and size of the PIP image.

6.RATIO

By pressing the Ratio button, you can select the screen aspect ratio you prefer: 4:3,16:9 or native input source resolution in RGB or DVI mode (when the input source’s resolution is lower than the projector provides, you don’t need to rescale the image.).

7.RETURN

Back to the last state from “ZOOM”, “BLANK”, “FREEZE” or “PIP”.

8

DLP Personal Projector