External Control Panel

2.Temp Indicator

3.Lamp Indicator

4.POWER

5.MENU / EXIT

9.KEYSTONE - / Left

7.AUTO

12.DOWN

			1. Power Indicator
	POWER	11. Up	6. SOURCE
MENU		SOURCE	10.KEYSTONE + / Right
/EXIT
KEYSTONE -		KEYSTONE +
AUTO		BLANK8. BLANK

1. Power indicator

The indicator shows green for a normal state. When the projector is in Standby mode, it shows orange toggle. See "Operative Information" on page 26 for more detailed information.

2. Temp indicator

The Temp indicator shows red or flashed red when the system temperature is too high or has fan problems, which may occur if the projector is operated improperly. See "Operative Information" on page 26 for more detailed information.

3. Lamp Indicator

The Lamp Indicator will light up when the lamp needs service, cooling or replacement. See “Lamp Information” on page 25 and "Operative Information" on page 26 for more detailed information.

4. POWER

Press and hold the POWER key for 1 second to turn on or off the projector.

5. MENU / EXIT

Brings the OSD menu or leaves the OSD menu.

6. SOURCE

Selects signal sources from among Analog RGB, DVI, YPbPr, S-Video and Composite Video.

7. AUTO

Automatically determines the suitable frequency and clock for current received signals. The auto adjustment function will not affect the current brightness and colors settings.

8. BLANK

Uses BLANK to hide the screen image. You can press BLANK again or RETURN to bring the image back.

When this function is activated, the sound will not stop, unless you press MUTE.

9.KEYSTONE - 10. KEYSTONE +

Presses KEYSTONE - to correct a image that is wider at the top. Presses KEYSTONE + to correct a image that is wider at the bottom.

9.Left < 10. Right >

11. Up ^ 12. Down v

When the On-Screen Menu system is activated, the four buttons help you navigate among choices and settings in the menus and sub-menus.

DLP Personal Projector