Introduction

Caution

TO PREVENT SHOCK, DO NOT OPEN THE CABINET. NO USER –SER- VICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. PLEASE READ THIS USER’S GUIDE BEFORE YOU OPERATE YOUR PROJECTOR. SAVE THIS USER’S GUIDE FOR FUTURE REFERENCE .

Safety Instructions

1.Read this user’s guide before you operate your projector and save it for future reference.

2.The lamp becomes extremely hot during operation. Allow the projector to cool for approximately 45 minutes prior to removing the lamp assembly for replacement. Do not operate lamps beyond the rated lamp life.

Excessive operation of lamps beyond the rated life could cause them to explode on rare occasions.

3.Never replace the lamp assembly or any electronic components unless the projector is unplugged.

4.To reduce the risk of electric shock, do not disassemble this appliance. Take it to a qualified technician when service or repair is required. Incorrect reassembly can cause electric shock when the appliance is subsequently used.

5.Do not place this product on an unstable cart, stand, or table. The product may fall, sustaining serious damage.

6.Do not touch the top cover when the projector is under operation.

7.The projector must be packaged into a carry bag while moving to another place for operation.

8.To avoid the lamp being damaged, never turn the Main Power Switch off in the back of the projector during operation. The normal operation procedures are to turn the power button off, and, after a 90-second cooling process, turn off the Main Power Switch.

DLP Personal Projector