Tips on Rear Panel Connections

S-VIDEO connections are provided for high performance laserdisc players, VCRs etc. that have this feature. Use these connections in place of the standard video connection if your device has this feature.

iiiiiiiiiiiiiiiiiIf your device!ii! has!il only one audio output (mono sound), connect it to the left audio jack on the television.

iiiiiiiiiiiiiiii_!_iill

Refer to the operating guide of your other electronic equipment for additional information on connecting your hook-up cables.

A single VCR can be used for VCR #1 and VCR #2, but note that a VCR cannot record its own video or line output (INPUT: 3 in the example on page 11). Refer to your VCR operating guide for more information on line input-output connections.

You may use VIDEO or S-VIDEO inputs to connect to Input 3, Input 4 or Input 5, but only one of these may be used at a time.

iiiiiiiiiiiiii'ii'ii ii i!!! ! iii!i! i!il

Connect only 1 component (VCR, DVD player, camcorder, etc.) to each input jack.

COMPONENT: Y-PBPR (Input 1 & 2) connections are provided for high performance components, such as DVD players and set- top-boxes. Use these connections in place of the standard video connection if your device has this feature. Input 2 accepts both composite and component video signals.

Your component outputs may be labeled Y, B-Y, and R-Y. In this case, connect the components B-Y output to the TV's PB input and the components R-Y output to the TV'sPR input.

Your component outputs may be labeled Y-CBC R. In this case, connect the components C B output to the TV's PB input and the components C R output to the TV's PR input.

You may use composite video signal for Input 2-Input 5.

It may be necessary to adjust TINT to obtain optimum picture quality when using the Y-PBPR inputs (see page 44).

To ensure no copyright infringement, the MONITOR OUT output may be abnormal, when using the Y-PBPR jacks and ANT C.

When using IEEE1394 connections, you enable video and audio digital data exchange between a compatible device, This connection also enables you to control basic equipment functions (such as VCR play, rewind, fast forward, stop, etc.) from your TV On-Screen Display.

The TV's IEEE1394 rear panel jacks are not compatible with DV-CAM (Digital Video Camera) IEEE1394 connections.

Not all devices with IEEE1394 capability are compatible with this TV. Any compatibility problems with other manufacturers devices should be brought to the attention of those manufacturers.

When using DVI input from a Set-Top-Box, it is recommended to use a 1080i or 720P input signal.