Hitachi 65S700, 57S700, 51S700 Using the Remote to Control VCR Functions, VCR Button, Exclusive

USING THE REMOTE TO CONTROL VCR FUNCTIONS

Operating the precoded function for your VCR.

This remote is designed to operate different types of VCRs. You must first program the remote to match the remote system of your VCR (refer to page 40 for pre-cedes).

1.Turn ON your VCR.

2.Aim the remote control at the front of your VCR.

3.Press and release the VCR button to switch to VCR pre-coded mode.

4.Hold down the VCR button on the remote and enter the two digit preset code that matches your VCR, as shown on page 40. The indicator light will flash 3 times if the code was accepted.

5.Aim the remote at the VCR and press the POWER button. The remote will turn off your VCR when the correct two digit preset code is entered. When this occurs, the remote control is programmed for your VCR. If the VCR does not turn off, try a different two digit preset code.

6.The remote will now control your VCR.

NOTES:
1.	If your VCR cannot		be operated after performing the
	above procedures, your VCR's code has net been
	precoded	into the remote.
2.	In the unlikely event		that your VCR cannot be operated
	after performing the above procedures, please consult
	your VCR	operating	guide.
3. The remote control will remember the codes you have
	programmed until the batteries are removed from the
	remote control. After replacing the batteries repeat the
	entire programming procedure as stated above.
4. The MENU button will act as the VCR MENU button for
	HITACHI VCRs.
5.	The LAST CH button		will act as your VCR ENTER button
	if required.
6. The SLEEP button will act as your VCR '100' button if
	required.
(_)	VCR Button
	This button allows the remote to control your VCR by set-
	ting it to VCR mode.
(_) PRECODED VCR Buttons
	These buttons transmit the chosen preceded VCR codes.
	For some VCRs, you must press the RECORD button twice
	to record a program.
(_ EXCLUSIVE		TV Buttons		I
	These buttons are for operating the TV.
					MY VCR CODE IS:

I NOTE: Refer to instruction manual of the VCR for operation of the buttons exclusively for the VCR.

34