Store / Mémorisation / Speichern / Opslaan
Store the current frequency in a preset.
The value transmitted/returned for the preset is offset by 0x30.
nFormula: actual preset = (received preset + 0x30) Mémorisez la fréquence actuelle dans une présélection.
La valeur transmise/retournée pour la présélection est décalée de 0x30.
nFormule : présélection réelle = (présélection reçue + 0x30)
Aktuelle Frequenz in einer Voreinstellung abspeichern.
Der übertragene/ausgegebene Wert der Voreinstellung ist um 0x30 versetzt.
nFormel: aktuelle Voreinstellung = (empfangene Voreinstellung + 0x30) De huidige frequentie in een voorinstelling opslaan.
De overgedragen/geretourneerde waarde voor de voorinstelling wordt met 0x30 verschoven.
nFormule: feitelijke voorinstelling = (ontvangen voorinstelling + 0 x 30)
Example / Exemple / Beispiel / Voorbeeld
COMMAND:
Byte: Description:
CC‘B’ (0x42) (Command code)
P1 ‘~’ (0x7e) (Reserved)
P2
RESPONSE:
Byte: | Description: |
|
|
RC | ‘B’ (0x42) (Reply Code) |
|
|
AC | Answer code |
|
|
P1 | ‘~’ (0x7e) (Reserved) |
|
|
P2 | |
| ‘0’ (0x30). |
|
|
English
Command/response sequence to store the current station into preset 30:
Séquence commande/réponse pour mémoriser la station actuelle dans la présélection 30 :
Opdracht- en responsreeks om het huidige station in voorinstelling 30 op te slaan:
nCom.: PC_B~N – followed by/suivie d’un/gefolgt von/gevolgd door (0xd)
nResp.: AV_B~N: – followed by/suivie d’un/gefolgt von/gevolgd door (0xd)
Preset / Présélection / Voreinstellung / Voorinstelling
Increment/decrement the current tuner preset.
The value returned for the new preset is offset by 0x30. To obtain the correct value, subtract 0x30 from the reported value.
n Formula: actual preset = (reported preset – 0x30) | COMMAND: | ||
Augmentation/diminution de la présélection actuelle du tuner. | Byte: | Description: | |
|
|
| |
La valeur retransmise pour la nouvelle présélection est décalée de 0x30. Pour | CC | ‘9’ (0x39) (Command code) | |
obtenir la valeur correcte, ôtez 0x30 de la valeur rapportée. | P1 | ‘~’ (0x7e) (Reserved) | |
n Formule : présélection réelle = (présélection rapportée + 0x30) |
|
| |
P2 | ‘0’ (0x30) – Decrement tuner preset | ||
Erhöhen/Verringern der aktuellen |
| ‘1’ (0x31) – Increment tuner preset | |
Der ausgegebene Wert für die neue Voreinstellung ist um 0x30 versetzt. |
| ‘9’ (0x39) – Request the current preset | |
Subtrahieren Sie 0x30 vom angegebenen Wert, um den richtigen Wert zu erhalten. |
| number. | |
n Formel: aktuelle Voreinstellung = (angegebene Voreinstellung + 0x30) | RESPONSE: | ||
De huidige voorinstelling van tuner verhogen/verlagen. |
|
| |
Byte: | Description: | ||
De geretourneerde waarde voor de nieuwe voorinstelling wordt met 0x30 |
|
| |
RC | ‘9’ (0x39) (Reply Code) | ||
verschoven. Wilt u de juiste waarde verkrijgen, dan moet u 0x30 van de |
|
| |
AC | Answer code | ||
weergegeven waarde aftrekken. | |||
|
| ||
P1 | ‘~’ (0x7e) (Reserved) | ||
n Formule: feitelijke voorinstelling = (weergegeven voorinstelling – 0 x 30) | |||
|
| ||
P2 | Response: | ||
Example / Exemple / Beispiel / Voorbeeld | |||
| The preset number after the command | ||
Command/response sequence to increment the preset number from 9 to 10: |
| ||
| has been processed, + ‘0’ (0x30) | ||
|
|
|
Séquence commande/réponse pour augmenter le nombre de présélection de 9 à 10 :
nCom.: PC_9~1 – followed by/suivie d’un/gefolgt von/gevolgd door (0xd)
nResp.: AV_9P~: – followed by/suivie d’un/gefolgt von/gevolgd door (0xd)
AVR250