Connections (Continued)
Connecting to an Amplifier
Connecting to an amplifier equipped with two channel analog stereo or Dolby Pro Logic ll/ Pro Logic
Connect the Left and Right AUDIO OUTPUT jacks on the Recorder to the audio left and right in jacks on your amplifier, receiver, or stereo system, using the audio cables (A).
Connecting to an amplifier equipped with two channel digital stereo (PCM) or to an Audio/ Video receiver equipped with a
1OUTPUT jacks (OPTICAL O or COAXIAL X) to the
corresponding in jack on your amplifier. Use an optional digital (optical O or coaxial X) audio cable.Connect one of the Recorder’s DIGITAL AUDIO
2output. (See “Audio Settings” on page 22).You will need to activate the recorder’s digital
ip
Digital Multi-channel sound
A digital
(MPEG 2, Dolby Digital and DTS). Check the receiver manual and the logos on the front of the receiver.
Caution:
Due to the DTS Licensing agreement, the digital output will be in DTS digital out when DTS audio stream is selected.
otes
–If the audio format of the digital output does not match the capabilities of your receiver, the receiver will produce a strong, distorted sound or no sound at all.
–Six Channel Digital Surround Sound via digital con- nection can only be obtained if your receiver is equipped with a Digital
–To see the audio format of the current DVD in the on- screen display, press AUDIO.
–This recorder does not perform internal (2 channel) decoding of a DTS sound track. To enjoy DTS multi channel surround, you must connect this recorder to a DTS compatible receiver via one of this recorder’s digital audio outputs.
Rear of Recorder
HOOKUP
O |
| X |
| A |
|
| |||
|
| |||
|
|
|
|
|
|
|
|
|
|
OPTICAL | COAXIAL | L | R |
DIGITAL INPUT | DIGITAL INPUT | AUDIO INPUT | |
Amplifier (Receiver)
Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the
“DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
15