NEC NDRV-62 Operation with DVD and Video CD Playing a DVD or Video CD, General Features

Operation with DVD and Video CD

Playing a DVD or Video CD

Playback Setup

Before using the remote control, press the DVD but- ton to select the device to be operated.

Turn the TV on and select the video input source con- nected to the Recorder.

Audio system: Turn the audio system on and select the input source connected to the Recorder.

1Press OPEN/CLOSE (Z) to open the disc tray.

2 Load your chosen disc in the tray, with the playback side down.

3REAd appears on the display window, and playback starts automatically. If playback does not start, press N (PLAY).

In some cases, the disc menu might appear instead.Press OPEN/CLOSE (Z) to close the tray.

ip

If a menu screen is displayed

The menu screen may be displayed first after loading a DVD or Video CD which contains a menu.

DVD

Use the b B v V buttons to select the title/chapter you want to view, then press ENTER to start playback. Press TITLE or DISC MENU / LIST to return to the menu screen.

VCD

Use the number buttons to select the track you want to view.

Press RETURN (O) to return to the menu screen. Menu setting and the exact operating procedures for using the menu may differ depending on the disc. Follow the instructions on each menu screen.

You may also set PBC to OFF under Setup menu. See page 27.

otes

–If Parental Control is set and the disc is not within the Rating settings (not authorized), the 4-digit code must be entered and/or the disc must be authorized (see “Rating”, on page 23).

–DVDs may have a Region Code.

Your recorder will not play discs that have a region code different from your recorder. The region code for this recorder is 4 (four).

General Features

ote

Unless stated otherwise, all operations described use the remote control. Some features may also be available on the Setup menu.

Moving to another TITLE

DVD Video VR +RW +R DivX

When a disc has more than one title, you can move to another title as follows:

Press DISPLAY twice then use v / V to select the title icon. Then, press the appropriate numbered but- ton (0-9) or b / B to select a title number.

Moving to another CHAPTER/TRACK

DVD VR +RW +R VCD

When a title on a disc has more than one chapter/track, you can move to another chapter/track as follows:

Press SKIP (. or >) briefly during playback to select the next chapter/track or to return to the begin- ning of the current chapter/track.

Press SKIP (.) twice briefly to step back to the previous chapter/track.

To go directly to any chapter/track during playback, press DISPLAY twice. Then, use v / V to select chap- ter icon (or for a Video CD, select track icon). Then, enter the chapter/track number using the numbered buttons (0-9) or press b / B.

Search DVD Video VR +RW +R

VCD DivX

1Press BACKWARD (m) or FORWARD(M) during playback.

The recorder will now go into SEARCH mode.

2Press BACKWARD (m) or FORWARD(M) to select the required speed: b (Reverse play), m, mb, mm, mmb, mmm (backward) or M, MB, MM, MMB, MMM (forward). With a Video CD, DivX disc, the Search speed changes: m, mb, mm (backward) or M, MB, MM (forward).

3To exit SEARCH mode, press N (PLAY).

Still Picture and Frame-by-Frame Playback

DVD Video VR +RW +R VCD

1Press PAUSE/STEP (X) during playback. The recorder will now go into PAUSE mode.

2You can advance or back up the picture frame-by- frame by pressing b / B repeatedly during PAUSE mode.

3To exit PAUSE mode, press N (PLAY).

ote

The picture frame-by-frame in reverse is not available for Video CD.

ip

You can advance the picture frame-by-frame by press- ing PAUSE/STEP (X) repeatedly on the remote control.

HOOKUP

29