NEC NDRV-62 owner manual Disc Settings, DV Record Audio, Auto Chapter, Initialize

Press ENTER. Initialize menu appears.

Press HOME.

The Home menu appears.

Before Operation (Continued)

DV Record Audio

You need to set this if you have a camcorder using 32kHz/12-bit sound connected to the front panel DV IN jack.

Some digital camcorders have two stereo tracks for audio. One is recorded at the time of shooting; the other is for overdubbing after shooting.

On the Audio 1 setting, the sound that was recorded while shooting is used.

On the Audio 2 setting, the overdubbed sound is used.

Auto Chapter

When recording, chapter markers are inserted at specified intervals. You can change this interval to 5 minutes, or 10 minutes. If you select None, it switches off automatic chapter marking altogether.

Disc Settings

Initialize

If you load a completely blank disc, the recorder will ini- tialize the disc.

DVD-R:The recorder initialize the disc to Video mode. The recording mode will always be Video mode. DVD-RW:The Initialize menu will appears. Select “OK” then press ENTER. The recorder initialize the disc to Video mode. If you change to VR mode, go to step 9. DVD+R(DL)/DVD+RW: The Initialize menu will appears. Select “OK” then press ENTER.

Also, you can reformat the DVD-RW/DVD+RW from the Setup menu as below.

1

2Use b / B to select the Setup option.

3While the Start option is selected, press ENTER.

4Use v / V to select the Disc option.

5Press B to move to the second level.

6Use v / V to select the Initialize option.

7 Press B to move to the third level. Start icon is highlighted.

8

9select a desired Disc Format Mode (VR Mode or

Video Mode) then press ENTER.

In case of DVD+RW, go to step 10.In case of the initialized DVD-RW, use b / B to

Use b / B to select “OK” then press ENTER.

10 It takes a few moments to format the disc.

Caution

If you want to change the disc format, everything recorded on the disc will be erased.

HOOKUP

25