NEC NDRV-62 Disc Label, Finalize menu appears, Character then press Enter to confirm your

Press ENTER. Keyboard menu appears.

Before Operation (Continued)

Finalize

Finalizing ‘fixes’ the recordings in place so that the disc can be played on a regular DVD player or computer equipped with a suitable DVD-ROM drive.

Finalizing a Video mode disc creates a menu screen for navigating the disc. This is accessed by pressing DISC MENU / LIST or TITLE.

Caution

Once you have finalized a DVD-R and DVD+R disc, you cannot edit or record anything else on that disc except DVD+RW. However, you can record and edit a DVD-RW disc by choosing “Unfinalize” option.

Follow steps 1-5 as shown on page 25

1 (Initialize).

2Use v / V to select the Finalize option.

3 Press B to move to the third level. Finalize is highlighted.

Press ENTER.

4 Finalize menu appears.

5The recorder starts finalizing the disc.Select OK then press ENTER.

ote

How long finalization takes depends on the type of disc, how much is recorded on the disc, and the number of titles on the disc.

ip

If you load a DVD-RW that has already been finalized, you can ‘unfinalize’ it by choosing Unfinalize from the Finalize menu. After doing this, you can edit and re-record onto the disc.

Disc Label

Use this to enter a name for the disc. This name appears when you display disc information on-screen.

•The disc name can be up to 32 characters long.

•For discs formatted on a different Recorder, you will see only a limited character set.

1Follow steps 1-5 as shown Initialize on page 25.

2Use v / V to select the Disc Label option.

Press B to move to the	third level.
3 Edit icon is highlighted.

4

5a character then press ENTER to confirm your

selection. Refer step 3 as shown on page 19 (Station Rename).Enter a name for the disc. Use v V b B to select

Remote control buttons for entering a name

N(PLAY): Inserts a space at the cursor position.

X(PAUSE/STEP): Deletes the after character at the cursor position.

x(STOP), CLEAR: Deletes the previous character at the cursor position.

./ >: Moves cursor to left or right.

Numbers (0~9): Enters the character of correspon- ding location on the selected column.

DISC MENU / LIST, DISPLAY: Switches the key- board type (English/Latin Capital, English/Latin Lowercase, Symbols)

6 Choose OK then press ENTER to fix the name and return to the Setup menu.

7Press HOME to exit the menu.

26