Cooling Your Room
You must select the Cool mode if you wish to lower the temperature in your room. You can also set the Fan speed.
Remote Control Control Panel | 1 Press the | (On/Off) button. | ||
|
|
| Result: | The air conditioner starts up in the Cool mode. |
|
|
| ||
The unit beeps twice.
The air conditioner is fitted with a protection mechanism to prevent the unit from being damaged when it is started immediately after being:
Plugged in
Stopped
It will start up normally after three minutes.
2If the temperature is not displayed on the control panel:
Press the |
|
|
|
| button on the remote control |
|
|
| ||
or |
|
|
|
|
|
|
|
|
|
|
Press the |
|
|
|
| button on the unit one or more times until the |
| ||||
|
|
|
|
| ||||||
temperature is displayed. |
|
|
| |||||||
Result: | The unit beeps each time you press the |
|
| / |
| button. | ||||
| ||||||||||
| The air conditioner starts up in the Cool mode. |
|
|
| ||||||
You can change modes at any time.
3 To adjust the temperature, press the 
or 
buttons on the remote control or unit one or more times until the desired temperature is displayed.
The temperature can be set between 18 C and 30 C. |
| ||
Result: | Each time you press the | or | buttons: |
- The temperature is adjusted by 1
C and displayed on the control panel
- The unit beeps
The air conditioner starts cooling, if the room temperature is higher than the selected temperature.
If the room temperature reaches the set temperature, the air conditioner stops cooling, but the fan is still operating.
4To set the fan speed:
Press the 
,
or 
button on the remote control as desired. or
Press the Fan!Speed button on the unit one or more times until the desired Fan speed(F1, F2 or F3) is displayed.
5To control the direction of the air flow, refer to page 11.
