Chapter 2: Using the Remote Control
Master(Installer) Remote
The master remote control (R130K2) accesses all of the TV’s menus. It is used to customize the TV’s functional- ity for specific users or specific situations.
|
|
| |
1 | 1 | 2 | 3 |
|
| SYSTEM | |
|
|
| |
| 4 | 5 | 6 |
|
|
| RESET |
| 7 | 8 | 9 |
| SKIP |
| SLEEP GUIDE |
5 |
| 0 |
|
| GO BACK |
| CC |
8 |
| CH |
|
MUTE
10VOL
VOL
1.NUMBER BUTTONS Selects channel numbers.
2.
2Switches the set on or off.
3.SYSTEM
3Configures the remote for TV1/TV2/TV3.
4Configures the remote preamble (Bed 1/Bed 2/Bed 3) for use with multi TVs in 1 room.
7Press and hold <SYSTEM> and <1> key to set remote for
6“Bed1”.
9Press and hold <SYSTEM> and <2> key to set the remote
for “Bed2”.
Press and hold <SYSTEM> and <3> key to set the remote for “Bed3”.
Refer to “Key Management”,”RCU type” in Chapter 5.
11
CH
124. RESET
INPUTANTENNA
MENU | OK | INFO |
13
CLEAR
14
15Unused.
5.SKIP
16Unused
6.SLEEP
17Sets the sleep timer.
7.GUIDE
Display “Channel List” menu.
M A S T E R
R130K2
Put Batteries in the Remote
•Remove the battery compartment cover from the back of the remote by pushing the tab and lifting off the cover.
•Insert two fresh batteries. Make sure the polarities (+ and
•Replace the cover.
8.GO BACK
Return to the previous menu.
9.CC
Select the Caption menu directly.
10.VOL + / VOL - Adjusts sound level.
CH + / CH - Select a channel.
MUTE
Switches the sound on or off.
11.INPUT
Selects the TV, AV or USB mode.
12.ANTENNA Unused
13.MENU
Displays “Installer” on screen menu. There are 2 remotes for this TV;
R130K1 - user Remote. This remote displays a basic user menu when the menu key is pressed.
R130K2 - installer Remote. This remote displays an installer menu when the menu key is pressed.
14.Navigational Controls Adjusts menu settings. Selects menu item.
15.OK
Accepts your selection.
16.INFO
Display the current channel information.
17.CLEAR
Exit from any OSD.
14 | Chapter 2 |
