NEC X462SAVT, X552SAVT user manual Attaching optional external speaker X401S, English-8

7. Attaching optional external speaker (X401S)

Follow these steps to connect to the speaker to the monitor.

1.Turn off the power to the monitor.

2.Attach the cushion for SP-RM2 to the back side of the monitor (F).

3.Connect the speaker and the monitor.

The red cable (+) connects to the red (+) terminal and the black cable (-) connects to the black (-) terminal (J).

When using a stereo mini jack to connect external equipment, the stereo mini jack may need to be L-shaped and under 29 mm of connector head (H, I).

4.Use the pan head screws* to attach the wires with washers* to the speakers (A, C).

5.Use the step screws* to attach the speakers to the monitor (B, D, E).

To manage excess speaker wire: Coil the speaker wire and wrap it using clamps* (G).

*: included in speaker.

A. Pan head screw

B. Step screw

C. Wire with washer

D.Washer

E.Screw hole

F.Cushion for SP-RM2 position

G.Clamp

H. Audio out

I.Audio in

J.External speaker terminal

NOTE:

When connecting AUDIO OUT or AUDIO IN, please note that a stereo mini jack has under 29 mm L-shaped connector head.

under 29 mm

NOTE: Do not use devices other than specifi ed.

NOTE: Use the SP-RM2 for the X401S. For more information, please refer to the SP-RM2 Quick Start Guide.

English-8