3. Using Wall Mount Adapter
If the mounting accessory interferes with the option board, ventilation hold or speaker attachment hole, use the included wall mount adaptors and screws. If the adaptor screws are too long, include a washer to reduce the depth. Washer not included.
| Wall mount adapter | |||
Unit |
|
|
| Mounting bracket |
|
|
|
| Washer |
|
|
|
| Wall mount |
|
|
|
| |
|
|
|
| |
|
| |||
|
| adapter screw | ||
|
|
|
| |
NOTE: Install the stand so the long end of the feet face forward. Use the
5. Ventilation Requirements
When mounting in an enclosed space or recessed area, leave adequate room between the monitor and the enclosure to allow heat to disperse, as shown below.
English
250 mm (X401S) |
265 mm (X462S/X552S) |
Pictured mounting solutions may not be available in all countries.
4.Installing and removing optional table top stand
CAUTION: Installing and removing the stand must be done by two or more people.
To install, follow those instructions included with the stand or mounting apparatus. Use only those devices recommended by the manufacturer.
NOTE: For X462S/X552S, use ONLY thumbscrews which are included in the monitor. For X401S, use ONLY thumbscrews which are included with the optional table top stand.
When installing the LCD monitor stand, handle the unit with care to avoid pinching your fi ngers.
Optional table top stand
Table
Protective Sheet
Allow adequate ventilation or provide air conditioning around the monitor, so that heat can properly dissipate away from the unit and mounting apparatus; especially when you use monitors in multiple screen.
NOTE: The sound quality of the internal speakers will differ according to the acoustics of the room.
6. Prevent Tipping
When using the display with the optional table top stand fasten the LCD to a wall using a cord or chain that can support the weight of the monitor in order to prevent the monitor from falling. Fasten the cord or chain to the monitor using the provided clamps and screws.
For the X401S, the clamps and screws are included with the optional table top stand.
295 mm
Screw Holes
Cord or chain
Clamp
Screw (M4)
Before attaching the LCD monitor to the wall, make sure that the wall can support the weight of the monitor.
Be sure to remove the cord or chain from the wall before moving the LCD.