NEC V423AVT Setup, Determine the installation location, Install the remote control batteries

Page 14

Setup

1. Determine the installation location

CAUTION: Installing your LCD monitor must be done by a qualifi ed technician. Contact your dealer for more information.

CAUTION: MOVING OR INSTALLING THE LCD MONITOR MUST BE DONE BY TWO OR MORE PEOPLE. Failure to follow this caution may result in injury if the LCD monitor falls.

CAUTION: Do not mount or operate the monitor upside down, face up or face down.

CAUTION: This LCD has a temperature sensor and cooling fans, including a fan for the option board.

If the LCD becomes too hot, the cooling fans will turn on automatically.

The fan of option board is active although the temperature is lower than normal operating temperature for cooling the option board. If the LCD becomes overheated while the cooling fan is running, a “Caution” warning will appear. If the “Caution” warning appears, discontinue use and allow the unit to cool. Using the cooling fan will reduce the likelihood of early circuit failure and may help reduce image degradation and “Image Persistance”.

If the LCD is used in an enclosed area or if the LCD panel is covered with a protective screen, please check the inside temperature of the monitor by using the “HEAT STATUS” control in the OSD (see page 24). If the temperature is higher than the normal operating temperature, please turn the cooling fan to ON within the FAN CONTROL menu within the OSD (see page 24).

IMPORTANT: Lay the protective sheet, which was wrapped around the LCD monitor when it was packaged, beneath the LCD monitor so as not to scratch the panel.

2. Install the remote control batteries

The remote control is powered by two 1.5V AA batteries. To install or replace batteries:

A.Press and slide to open the cover.

B.Align the batteries according to the (+) and (–) indications inside the case.

C.Replace the cover.

CAUTION: Incorrect usage of batteries can result in leaks or bursting.

NEC recommends the following battery use:

•Place “AA” size batteries matching the (+) and (-) signs on each battery to the (+) and (-) signs of the battery compartment.

•Do not mix battery brands.

•Do not combine new and old batteries. This can shorten battery life or cause liquid leakage of batteries.

•Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

•Do not touch exposed battery acid, it may injure skin.

NOTE: If you do not intend to use the Remote Control for a long period of time, remove the batteries.

3. Connect external equipment (See pages 14 and 15)

•To protect the external equipment; turn off the main power before making connections.

•Refer to your equipment user manual for further information.

NOTE: Do not connect/disconnect cables when turning on the monitor or other external equipment as this may result in a loss of the monitor image.

4. Connect the supplied power cord

•The equipment should be installed close to an easily accessible power outlet.

•Please fasten power cord to the LCD monitor by attaching the screw and clamp.

•Fully insert the prongs into the power outlet socket. A loose connection may cause image degradation.

NOTE: Please refer to the “Safety Precautions and Maintenance” section of this manual for proper selection of AC power cord.

Screw

Clamp

English-12

Page 13 Page 15
Image 14
Page 13 Page 15
Contents User’s Manual Index Declaration of ConformityEnglish-1 Canadian Department of Communications Compliance StatementFCC Information Important Information English-2Recommended Use Cleaning the LCD PanelCleaning the Cabinet ErgonomicsContents Installation Using Option Board Attaching Mounting AccessoriesAttach Mounting Accessories Installing and removing optional table top standPrevent Tipping English-7Parts Name and Functions Control PanelTerminal Panel Wireless Remote Control Operating Range for the Remote Control Handling the remote controlInstall the remote control batteries SetupDetermine the installation location Connect the supplied power cordAdjust the screen See pages 20 Switch on the power of all the attached external equipmentAdjust the sound Adjust the image SeeBefore making connections Wiring DiagramConnections English-14Connecting a Computer with DisplayPort Connecting a Personal ComputerConnecting a DVD Player or Computer with Hdmi out English-15English-16 Power on and OFF ModesBasic Operation Selecting a video source Power IndicatorUsing Power Management Picture AspectAmbient parameter setting Picture ModeAmbient Mode Information OSDOSD On-Screen-Display Controls English-19English-20 AdjustPicture English-21 AudioSchedule English-22 PIPOSD Multi Display English-23Display Protection English-24Advanced Option English-25English-26 English-27 Image Sticking of LCD PanelRecommendations Remote Control Function English-28English-29 Connection English-30Function Monitor ID = Code Data English-31Controlling the LCD monitor via LAN Control Connecting to a NetworkNetwork Setting by Using an Http Browser OverviewHandling of the Address for Operation via a Browser Network SettingsPreparation Before Use English-33Alert Mail Setting English-34OSD Display PROTECTION-FAN Alert error message listEnglish-35 CONTROL-COOLING FAN = AutoFeatures English-36Troubleshooting English-37English-38 SpecificationsProduct Specifications English-39 Pin Assignment English-40Energy Saving Manufacturer’s Recycling and Energy InformationDisposing of your old NEC product Weee Mark European Directive 2002/96/EC

V423AVT specifications

The NEC V423AVT is a high-performance 42-inch LCD display specifically designed for a variety of commercial applications. Renowned for its versatility and outstanding visual quality, this model stands out in a crowded market due to its advanced features and reliable technology.

One of the main highlights of the NEC V423AVT is its impressive screen resolution. With a native resolution of 1920 x 1080 pixels, the display delivers sharp and vibrant images, making it ideal for digital signage, retail displays, and conference room presentations. The high-definition capabilities allow for clear text and detailed graphics, essential for conveying information effectively.

The NEC V423AVT also boasts a remarkable brightness level of 450 cd/m², ensuring visibility even in well-lit environments. This is particularly beneficial for outdoor signage or brightly lit indoor settings where maintaining image clarity is crucial. Coupled with a contrast ratio of 4000:1, the display produces vivid colors and deep blacks, enhancing the overall viewing experience.

Another significant feature of the V423AVT is its advanced connectivity options. Equipped with multiple input sources, including HDMI, DVI, and VGA, this display is adaptable to various multimedia devices. It supports both analog and digital signals, enabling seamless integration with existing systems. The built-in USB port allows for easy content management and playback directly from USB drives, simplifying operations for users.

In terms of durability and design, the NEC V423AVT is constructed to withstand continuous operation. It is engineered for 24/7 usage, making it a reliable choice for demanding environments like airports, shopping malls, and control rooms. The slim bezel design not only enhances aesthetics but also maximizes the active display area, making it visually appealing while providing an uninterrupted viewing experience.

The V423AVT incorporates advanced thermal management technologies, ensuring optimal performance and longevity. This helps prevent overheating during prolonged use, further extending the lifespan of the display.

Overall, the NEC V423AVT is an exceptional LCD display that combines cutting-edge technology, versatility, and reliability. With its high-resolution display, robust construction, and extensive connectivity options, it caters to a wide range of commercial applications, making it an excellent investment for businesses looking to enhance their visual communication capabilities.
Top Page Image Contents