Manuals / Vivotek / Household Appliance / Home Security System

Vivotek IP8364-C user manual Hardware Installation

Models: IP8364-C

1 196

Download 196 pages 36.28 Kb

Page 7

Hardware Installation

VIVOTEK

Hardware Installation

If you prefer installing a MicroSD card as onboard storage:

1.Loosen the waterproof connector, and then remove the rubber seal, and the waterproof connector.

2.Loosen and open the rear cover.

3.Install a MicroSD/SDHC card.

4.Tear down the aluminum foil vacuum bag and take out the dessicant bag. Attach the supplied dessicant bag to the inner side of the Network Camera. (Please replace the dessicant bag with a new one every time you open the rear cover.)

5.Connect an Ethernet cable and DI lines to the camera, and pass them through the rubber seal.

		Micro	3
	2	SD	3
		SD

1

4

5

IMPORTANT:

The diameters of the cable holes on the rubber seal

are shown on the right. Please properly install the

waterproof cable gland and cables through it to obtain

IP66 waterproof functionality.

All units are in millimeters. The cable range for the

Ethernet cable is 6.4 to 4.3mm, 1.6mm for DI lines.

User's Manual - 7

Image 7

Vivotek IP8364-C user manual Hardware Installation

Contents

Rev. VIVOTEK Table of ContentsElectromagnetic Compatibility EMC VIVOTEKUsers Manual - Revision History OverviewSymbols and Statements in this Document Package ContentsRead Before Use Lens Front PanelRear Panel Reset ButtonHardware Installation General I/O Terminal Block DI/DO Diagram+12V 6.Install and tighten the cameras rear cover 10 - Users Manual Fastening ring 75º Tilt 360º PanCeiling Mount Wall Mount VIVOTEKMicro SD/SDHC Card Capacity Hardware ResetGeneral Connection PoE When using a PoE-enabledswitchWhen using a non-PoEswitch Network DeploymentInternet connection with static IP Internet connection via a routerNetwork Camera Software InstallationReady to Use Secure the Shooting Angle Using Web Browsers Accessing the Network CameraNOTENOTE 18 - Users Manual Tips Using RTSP Players Using 3GPP-compatibleMobile Devices 22 - Users Manual Using VIVOTEK Recording SoftwareCamera Control Area Main PageVIVOTEK INC. Logo Host NameLive Video Window Configuration AreaHide Button Resize ButtonsThe largest frame size The viewing region of the curruent video streamsome buttons may not be available page H.264 Protocol Options Client SettingsLocal Streaming Buffer Time MP4 Saving OptionsEnable Joystick Joystick settingsButtons Configuration Tips Buttons Configuration32 - Users Manual Basic Mode ConfigurationAdvanced Mode System > General settingsSystem System time System > Homepage layout General settingsTheme Options 1. Click Custom on the left column 1.Select Enable remote log Log server settingsSystem > Logs System logSystem > Parameters Access logGeneral settings Upgrade firmware System > MaintenanceGeneral settings > Reboot Import/Export files General settings > RestoreWhen completed, save the file Applicable scenario TipsGeneral settings Media > ImageDay/Night Settings Image settings Exposure Exposure control 1.Check Enable this profile Privacy mask Media Video Stream settingsX2.1 MediaNOTE:> VideoFrame size Video quality Constant bit rate NOTE NOTE Network Type Network > General settingsPPPoE Point-to-pointover Ethernet NOTENOTE Error: Router does not support UPnP port forwarding5. Click Next in the following window Link-localIPv6 address/network mask Enable IPv6Refers to Ethernet Link-globalIPv6 address/network mask1.Open your web browser Port HTTP streaming Network Streaming protocolsNOTENOTE RTSP Streaming2, or 3> 1.Launch an RTSP player Initial TTL Express link Network > DDNSDDNS: Dynamic domain name service Manual setupSafe100.net CustomSafe100 QoS models Network > QoS Quality of ServiceRequirements for QoS CoS the VLAN 802.1p model72 - Users Manual QoS/DSCP the DiffServ modelNetwork > SNMP Simple Network Management Protocol SNMP ConfigurationAccount Management Root PasswordSecurity > User accounts Privilege ManagementCreate self-signedcertificate Create and Install Certificate Method76 - Users Manual https2.Click Create certificate to proceed Create certificate request and install78 - Users Manual 7.Open a new edit, paste the certificate contents, and press ENTER at the end of the contents to add an empty line 80 - Users Manual 11.When the certifice file is successfully loaded, its status will be stated as Active. Note that a certificate must have been created and installed before you can click on the “Save button for the configuration to take effect General Settings Security > Access ListFilter Administrator IP address Security > IEEE The authentication process for Digital PTZ Operation E-PTZOperation PTZ > PTZ settingsx1.8 x1.8 Home page in the E-PTZMode x3.3x1.8 Patrol settings23 1 4 6 90 - Users Manual NOTENOTEEvent Event > Event settings2. Trigger 3. Action Add server Click Save server to enable the settings Passive mode The format is: YYYYMMDD Network storageThe format is: HH 24r Click 20130120to open the directoryThe format is: File name prefix + Minute mm Add media Add date and time suffix to the file name Maximum file size 102 - Users Manual Click to upload a file Customized ScriptClick to modify the script online Applications > Motion detection 2.Check Enable this profile How does motion detection work? spray paint 1.Check Enable camera tampering detectionApplications Digital input Applications > Tampering detectionInsert your SD card and click here to test Recording > Recording settingsRecording Settings Recording SettingsPre-eventrecording and post-eventrecording 1 24 NAS server3.Enter a server name 112 - Users Manual no SD card Local storage > SD card managementSD card staus SD card controlSearching and Viewing the Records Local storage > Content managementSearch Results For example 2. Style Convention URL Commands for the Network CameraAppendix 1. Overview3. General CGI URL Syntax and Parameters 4. Security Level Method: GET/POST 5. Get Server Parameter ValuesVIVOTEK URL Command Document for All SeriesIP8364Response network_ipaddress=192.168.0.123\r\nMethod: GET/POST 6. Set Server Parameter Values<group>_<name> returnResponse 7. Available parameters on the server Group: system 7.1 system240: GMT-06:00Central America, Central Time Moscow, Muscat, Baku daylight timezones 7.1.1 system.info Group: status 7.2 status<product dependent> Group: security 7.3 digital input behavior define7.4 security Group: di_i<0~ndi-1>Group: network 7.5 networkSubgroup of network: ieee8021x 7.5.1Subgroup of network: qos_dscp 7.5.2 QOS7.5.3 IPV6 Subgroup of network qos cosSubgroup of network: http 7.5.4 FTP7.5.5 HTTP Subgroup of network: ftp7.5.7.1 RTSP multicast 7.5.6 HTTPS port7.5.7 RTSP Subgroup of network: https_portGroup ipfilter 7.5.8 RTP port7.5.9 PPPoE 7.6ipfilter7.7 video input 7.7.1 video input setting per channel camera; 0 external svc is only supported with s 0~m-1 mjpeg priorit Set bit rate in bps when Group: videoin_c<0~n-1>_profile_i<0~m-1>s<0~m-1>_mjpeg_bitrate 1000~400000Group: videoinpreview 7.8 video input previewGroup: image_c<0~n-1> for n channel products 7.10 image setting per channel7.9 IR cut control Group: ircutcontrol capability.nvideoinprofile >percentage 7.11 image setting for preview 7.14 Motion detection settings 7.13 Time Shift settingsGroup: tampering_c<0~n-1> for n channel product 7.15 Tampering detection settings<provider>_h 7.16 DDNS7.16.1 Express link Group: ddns7.17 UPnP presentation 7.18 UPnP port forwardingGroup: upnppresentation Group: upnpportforwardingGroup: snmp 7.19 System log7.20 SNMP Group: syslog7.21 Layout configurationGroup: layout 7.23 Capability 7.22 Privacy maskGroup: capability Number of digital outputs 0not support, 1support protocol_maxconnecti videoin_resolution audioin_codec Page 7.24 Customized event script 7.25 Event settingGroup: event_customtaskfile_i<0~2> trigger weekday Group: server_i<0~4> 7.26 Server setting for event actionGroup: media_i<0~4> 7.27 Media setting for event actionGroup: recording_i<0~1> 7.28 Recordingweekday Group: https 7.29 HTTPS7.31 Region of interest 7.30 Storage management settingGroup: eptz_c<0~n-1> for n channel product 7.32 ePTZ setting<window size> <blank> preset_i<0~19>_sizeWidth and height of the preset URL Command Document for All SeriesIP83648.1 Query Status of the Digital Input 8. Useful FunctionsMethod: GET/POST Method: GET/POST 8.2 Capture Single SnapshotMethod GET/POST 8.3 Account Management8.4 System Logs 8.5 Upgrade FirmwareMethod: GET/POST Method: GET/POST 8.6 ePTZ Camera Controlzoom 8.7 ePTZ Recall 8.8 ePTZ Preset LocationsMethod: GET/POST 8.9.1 IP Filtering for ONVIF 8.9 IP FilteringMethod: GET/POST 8.10 Event/Control HTTP Tunnel Channel 8.12 Open the Network Stream 8.11 Get SDP of StreamsMethod: GET “m” is the stream number resolution 8.13.1 Return Message Error Occurs When Searching VIVOTEK URL Command Document for All SeriesIP8364Ex. Local storage status in XML format Ex. Local storage status in javascript formatCommand: queryStatus Method: GET/POST 8.14 Virtual input8.15 Open Timeshift Stream 8.16 Open Anystream input Method: GET 8.17 Export Files8.18 Upload Files Method: POSTfilename =<file name>\r\n \r\n <End of document>For setting backup file URL Command Document for All SeriesIP8364Compatible Accessories Technical SpecificationsTechnical Specifications DimensionsAMR-NBStandard Technology License NoticeVIVOTEK VCCI Warning Electromagnetic Compatibility EMCFCC Statement CE Mark Warning