VIVOTEK
6.Install and tighten the camera's rear cover.
7.Tighten the rubber seal, seal clamp, and cap nut of the waterproof connector.
6 
7
8.Pass the cables through the center of the ball swivel mount bracket, one at a time.
9.Fasten the bracket to the camera using 3 hex socket screws.
9
8
NOTE:
The camera weighs up to 1.28 kgs. Make sure the mounting surface can support this camera.
IMPORTANT:
Whenever you want to open the camera canister, loosen the waterproof cable gland before you loosen the rear cover. Otherwise, you can damage the cables attached to the inside of the camera.
User's Manual - 9
