Vivotek IP8364-C user manual IR cut control, image setting per channel, <product dependent>

VIVOTEK

URL Command Document for All SeriesIP8364

7.9 IR cut control

Group: ircutcontrol (capability.nvideoinprofile > 0)

NAME		VALUE		DEFAULT		SECURITY		DESCRIPTION
						(get/set)
mode	auto,		auto		6/6			Set IR cut control mode
		day,
		night,
		di,
		schedule
daymodebegintime	00:00~23:59		07:00		6/6		Day mode begin time
daymodeendtime	00:00~23:59		18:00		6/6			Day mod end time
disableirled		<boolean>	0		6/6			Enable/disable built-in IR led
<product dependent>								(capability.ir > 0)
bwmode	<boolean>		1		6/6		Switch to B/W in night mode if
								enabled
sensitivity		low,	normal		6/6			Sensitivity of light sensor
		normal,
		high

7.10 image setting per channel

Group: image_c<0~(n-1)>for n channel products

NAME		VALUE			DEFAULT		SECURITY		DESCRIPTION
							(get/set)
brightness	-5		~ 5	-5		4/4		Adjust brightness of image according to
								mode settings.
saturation	-5		~ 5, 100	100		4/4			Adjust saturation of image according to
									mode settings.
									100 means using the parameter
									“saturationpercent”.
contrast	-5		~ 5	0		4/4		Adjust contrast of image according to
									mode settings.
sharpness	-3		~ 3, 100	100		4/4		Adjust sharpness of image according to
								mode settings.
								100 means using the parameter
									“sharpnesspercent”
saturationpercent	0 ~ 100			50		4/4		Adjust saturation of image by

33 User's Manual - 145