Sony STR-DA4ES operating instructions Precautions, Troubleshooting, 75GB

Page 75

Additional Information

Precautions

On safety

Should any solid object or liquid fall into the cabinet, unplug the receiver and have it checked by qualified personnel before operating it any further.

On power sources

•Before operating the unit, check that the operating voltage is identical with your local power supply. The operating voltage is indicated on the nameplate at the rear of the receiver.

•The unit is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the receiver itself has been turned off.

•If you are not going to use the receiver for a long time, be sure to disconnect the receiver from the wall outlet. To disconnect the AC power cord, grasp the plug itself; never pull the cord.

•One blade of the plug is wider than the other for the purpose of safety and will fit into the wall outlet only one way. If you are unable to insert the plug fully into the outlet, contact your dealer.

•AC power cord must be changed only at the qualified service shop.

On heat buildup

Although the unit heats up during operation, this is not a malfunction. If you continuously use this unit at a large volume, the cabinet temperature of the top, side and bottom rises considerably. To avoid burning yourself, do not touch the cabinet.

On placement

•Place the receiver in a location with adequate ventilation to prevent heat buildup and prolong the life of the receiver.

•Do not place the receiver near heat sources, or in a place subject to direct sunlight, excessive dust or mechanical shock.

•Do not place anything on top of the cabinet that might block the ventilation holes and cause malfunctions.

On operation

Before connecting other components, be sure to turn off and unplug the receiver.

On cleaning

Clean the cabinet, panel and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

If you have any question or problem concerning your receiver, please consult your nearest Sony dealer.

Troubleshooting

If you experience any of the following difficulties while using the receiver, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer.

There is no sound no matter which component is selected.

•Check that both the receiver and all components are turned on.

•Check that the MASTER VOLUME control is not set at –∞dB.

•Check that the SPEAKERS switch is not set to OFF (page 59).

•Check that all speaker cords are connected correctly.

•Press MUTING to cancel the muting function.

“Not PCM” appears in the display and no sound is heard.

•Set “DECODE FORMAT” to “AUTO” in the CUSTOMIZE menu (page 48).

There is no sound from a specific component.

•Check that the component is connected correctly to the audio input jacks for that component.

•Check that the cord(s) used for the connection is (are) fully inserted into the jacks on both the receiver and the component.

There is no sound from one of the front speakers.

•Connect a pair of headphones to the PHONES jack to verify that sound is output from the headphones.

If only one channel is output from the headphones, the component may not be connected to the receiver correctly. Check that all the cords are fully inserted into the jacks on both the receiver and the component.

If both channels are output from the headphones, the front speaker may not be connected to the receiver correctly. Check the connection of the front speaker which is not outputting any sound.

continued

Additional Information

75GB

Page 74 Page 76
Image 75
Page 74 Page 76
Contents FM Stereo FM-AM Receiver For customers in the United States About This Manual STR-DA7ESSTR-DA4ES Table of Contents Additional Information Operations using the remote STR-DA7ES onlyMain unit How to use thisList of Button Locations Reference Pages VOpen the front doorConnectable components Check how to hookup your componentsIf you have a Sony components with Control A1 /S-LINK jack Required cordsConnect the audio jacks Satellite tuner 1a Connecting components with digital audio output Jacks10GB Hooking up a DVD player, LD player, TV, or satellite tunerConnect the video jacks 11GBSee Assigning audio inputs Audio Split 12GBHooking up a CD/Super Audio CD player and MD/DAT deck CD/Super Audio CD MD/DAT deck PlayerConnect the audio jacks 13GB14GB 1b Connecting components with multi channel output jacksTape deck 15GBHooking up audio components TurntableCamcorder Or TV game 16GBHooking up video components TV monitorConnecting the antennas Connect the supplied AM loop antenna and FM wire antenna17GB Speaker impedance Connecting speakersExample of 7.1 channel speaker system configuration 18GB19GB Speakers Front BImpedance Selector AC in terminal Connecting the AC power cordAC power cord Supplied 20GBPerforming initial setup operations Speaker setup parameters21GB 22GB Center SP Center speaker sizeSurround SP Surround speaker size SUB Woofer Sub woofer selection Surr Back L/R 7.1 channel/ 6.1 channel switching23GB Surr Back SP Surround back speaker sizeCenter XX feet Center speaker distance Initial setting 16 feet24GB Front XX feet Front speaker distance25GB For advanced speaker setupsTo output the test tone only from a specific speaker Press Test Tone again after adjustmentFor more precise adjustment 26GB27GB Selecting the component28GB Automatic tuningSound Listening to FM/AM radioDirect tuning 29GBSTR-DA7ES 30GB Presetting radio stationsPresetting radio stations Tuning to preset stationsChanging the brightness of the display Changing the display31GB Changing the information in the displayAbout the indications in the display 32GBExample 33GB Mpeg Lights up when Mpeg signals are inputListening to 2 channel stereo sources 2CH Stereo Automatically decoding Input audio signalUsing only the front Speakers 34GBEnjoying movies using the Cinema Studio EX modes Selecting a sound field35GB Concert Hall a 36GBSelecting the Digital Concert Hall modes About Cinema Studio EX modesSelecting other sound fields 37GB38GB Enjoying the surround effect at low volume levelPress Night Mode Enjoying Dolby Pro Logic DTS Neo6Selecting the surround Back decoding mode 39GBSurround back decoding modes When you select OFF How to select the surround back decoding modeWhen you select Auto When you select MatrixSelectable audio inputs for each function Advanced adjustments and settingsAssigning the audio input 41GBAudio input modes Switching the audio inputSelected audio input mode appears in the display 42GB43GB Adjusting the Surround menuFor advanced Surround menu adjustments Customizing sound fieldsAdjusting the Level menu 44GBFor details, see Level menu parameters below 45GB Adjusting the equalizerResetting sound fields to the initial settings For advanced Level menu adjustments46GB Setup items for the EQ menuClearing Stored Equalizer Settings For advanced EQ menu adjustmentsPress Customize Advanced settingsUsing the Customize menu to adjust the receiver 47GBPCM Phase NoisePhase Audio 48GBAdvanced SET UP menu parameters All SET UP menu parameters49GB Middle 50GBReverse SideHigh Settings51GB LOW52GB Advanced Surround menu parametersAll Surround menu parameters 53GB Test Tone Front LIR 54GBAdvanced Level menu parameters All Level menu parameters55GB Advanced EQ menu parametersAll EQ menu parameters 56GB WideNarr 57GB Custom install modeInstaller mode 12V Trig mode58GB Naming preset stations FunctionsSelect Sleep from the Receiver menu Using the Sleep TimerSelecting the speaker System 59GBFor example, insert a CD into the CD player Recording60GB Recording on an audio tape or MiniDiscUsing the Control A1 system Control A1 /S-LINK control system61GB Connections If you have a Sony CD changer with a Command Mode selector62GB Control A1 hookup63GB Basic FunctionsAutomatic function selection Using S-LINK Control S system 64GBSynchronized recording 65GB ReceiverDVD Press AV System 2 while the button blinks Using the remote RM-US105AWhen using as a simplified remote Command mode has been changed3RD Room OUT Listening to the sound in another room67GB 2ND Room OUT68GB 2nd room operationRM-US105A 3rd room operation Command mode has been set to the 3rd room modeOperations using the remote STR-DA7ES only 69GBInserting batteries into the remote ?/1 switchCommand mode buttons 70GB71GB Changing button assignments 72GBHold Down USE MODE, then press ?/1 73GBAdvanced remote operations To clear all remote button assignmentsRoom OUT STR-DA7ES 74GBPrecautions Troubleshooting75GB 76GB Troubleshooting77GB Remote controlSpecifications 78GBAmplifier section 79GB 2nd room 67-69 3rd room Index

STR-DA4ES specifications

The Sony STR-DA4ES is a high-performance AV receiver that has garnered attention from audiophiles and home theater enthusiasts alike. Launched during the early 2000s, this model represents a blend of advanced technology and user-friendly design, making it a popular choice for those seeking immersive audio and video experiences.

One of the key features of the STR-DA4ES is its impressive power output. With 110 watts per channel across seven channels, the receiver delivers ample amplification to fill large rooms with rich, dynamic sound. It supports multiple audio formats, including Dolby Digital, DTS, and the advanced DSD for high-resolution audio. This versatility ensures that users can enjoy various content, from movies to music, without compromising on audio quality.

The receiver is equipped with a highly sophisticated digital signal processor (DSP) that optimizes sound reproduction. The Digital Cinema Sound technology enhances the listening experience by simulating different acoustics, allowing for a more immersive experience. Among its highlighted features is the automatic speaker calibration system, known as "Digital Auto Calibration," which fine-tunes the audio setup based on room characteristics. This feature simplifies the installation process by automatically adjusting settings for optimal sound.

The STR-DA4ES also boasts a range of connectivity options, including multiple HDMI inputs and outputs, component video inputs, and various digital and analog audio inputs. This ensures seamless integration with a wide array of devices, from Blu-ray players to gaming consoles, facilitating a comprehensive home theater setup. Additionally, the presence of dual-zone functionality allows for separate audio output in different rooms, catering to various listening preferences.

Another noteworthy characteristic of the STR-DA4ES is its robust build quality and aesthetic appeal. With a sleek, modern design, the unit complements any home decor while featuring a user-friendly interface that makes navigating settings straightforward. The remote control is intuitive, providing quick access to essential functions and custom presets.

In summary, the Sony STR-DA4ES stands out for its powerful performance, advanced processing capabilities, and versatile connectivity options, making it an excellent choice for home theater enthusiasts. Whether you're watching movies, playing games, or listening to music, it promises a captivating audio experience that elevates any entertainment setup.
Top Page Image Contents