Sony STR-DA4ES operating instructions 77GB, Remote control

Page 77

To connect an LD player via an RF demodulator

•Connect the LD player to the RF demodulator, then connect the RF demodulator’s optical or coaxial digital output to the receiver’s DVD/LD OPTICAL IN or COAXIAL jack. When making this connection, be sure to set INPUT MODE manually (page 42). The receiver may not operate correctly if INPUT MODE is set to AUTO 2CH.

For details on DOLBY DIGITAL RF hookups, see the operating instructions supplied with your RF demodulator.

The FM reception is poor.

•Use a 75-ohm coaxial cable (not supplied) to connect the receiver to an outdoor FM antenna as shown below. If you connect the receiver to an outdoor antenna, ground it against lightning. To prevent a gas explosion, do not connect the ground wire to a gas pipe.

Outdoor FM antenna

Receiver

ANTENNA 75Ω COAXIAL

FM

U AM

Ground wire (not supplied)

To ground

Radio stations cannot be tuned in.

•Check that the antennas are connected securely. Adjust the antennas and connect an external antenna if necessary.

•The signal strength of the stations is too weak (when tuning in with automatic tuning). Use direct tuning.

•Make sure you set the tuning interval correctly (when tuning in AM stations with direct tuning).

•No stations have been preset or the preset stations have been cleared (when tuning by scanning preset stations). Preset the stations (page 30).

•Press DISPLAY so that the frequency appears in the display.

There is no picture or an unclear picture appears on the TV screen or monitor.

•Select the appropriate function on the receiver.

•Set your TV to the appropriate input mode.

•Move your TV away from the audio components.

Remote control

The remote does not function.

•Point the remote at the remote sensor on the receiver.

•Remove any obstacles in the path between the remote and the receiver.

•Replace all the batteries in the remote with new ones, if they are weak.

•If the receiver’s COMMAND MODE and the remote’s COMMAND MODE do not match, transmission is not possible between the remote and the receiver (page 49).

•Make sure you select the correct function on the remote.

•When you operate a programmed non-Sony component, the remote may not function properly depending on the model and the make of the component.

Reference sections for clearing the memory

To clear

See

All memorized settings

page 21

 

 

Customized sound fields

page 45

 

 

All the settings in the remote

page 73

 

 

continued

Additional Information

77GB

Page 76 Page 78
Image 77
Page 76 Page 78
Contents FM Stereo FM-AM Receiver For customers in the United States STR-DA4ES About This ManualSTR-DA7ES Table of Contents Additional Information Operations using the remote STR-DA7ES onlyMain unit How to use thisList of Button Locations Reference Pages VOpen the front doorConnectable components Check how to hookup your componentsIf you have a Sony components with Control A1 /S-LINK jack Required cords10GB 1a Connecting components with digital audio output JacksHooking up a DVD player, LD player, TV, or satellite tuner Connect the audio jacks Satellite tunerConnect the video jacks 11GBHooking up a CD/Super Audio CD player and MD/DAT deck 12GBCD/Super Audio CD MD/DAT deck Player See Assigning audio inputs Audio SplitConnect the audio jacks 13GB14GB 1b Connecting components with multi channel output jacksHooking up audio components 15GBTurntable Tape deckHooking up video components 16GBTV monitor Camcorder Or TV game17GB Connecting the antennasConnect the supplied AM loop antenna and FM wire antenna Example of 7.1 channel speaker system configuration Connecting speakers18GB Speaker impedanceImpedance Selector 19GBSpeakers Front B AC power cord Supplied Connecting the AC power cord20GB AC in terminal21GB Performing initial setup operationsSpeaker setup parameters Surround SP Surround speaker size 22GBCenter SP Center speaker size 23GB Surr Back L/R 7.1 channel/ 6.1 channel switchingSurr Back SP Surround back speaker size SUB Woofer Sub woofer selection24GB Initial setting 16 feetFront XX feet Front speaker distance Center XX feet Center speaker distance25GB For advanced speaker setupsFor more precise adjustment Press Test Tone again after adjustment26GB To output the test tone only from a specific speaker27GB Selecting the componentSound Automatic tuningListening to FM/AM radio 28GBSTR-DA7ES Direct tuning29GB Presetting radio stations Presetting radio stationsTuning to preset stations 30GB31GB Changing the displayChanging the information in the display Changing the brightness of the displayExample About the indications in the display32GB 33GB Mpeg Lights up when Mpeg signals are inputUsing only the front Speakers Automatically decoding Input audio signal34GB Listening to 2 channel stereo sources 2CH Stereo35GB Enjoying movies using the Cinema Studio EX modesSelecting a sound field Selecting the Digital Concert Hall modes 36GBAbout Cinema Studio EX modes Concert Hall aSelecting other sound fields 37GBPress Night Mode Enjoying the surround effect at low volume levelEnjoying Dolby Pro Logic DTS Neo6 38GBSurround back decoding modes Selecting the surround Back decoding mode39GB When you select Auto How to select the surround back decoding modeWhen you select Matrix When you select OFFAssigning the audio input Advanced adjustments and settings41GB Selectable audio inputs for each functionSelected audio input mode appears in the display Switching the audio input42GB Audio input modesFor advanced Surround menu adjustments Adjusting the Surround menuCustomizing sound fields 43GBFor details, see Level menu parameters below Adjusting the Level menu44GB Resetting sound fields to the initial settings Adjusting the equalizerFor advanced Level menu adjustments 45GBClearing Stored Equalizer Settings Setup items for the EQ menuFor advanced EQ menu adjustments 46GBUsing the Customize menu to adjust the receiver Advanced settings47GB Press CustomizePhase Audio Phase Noise48GB PCM49GB Advanced SET UP menu parametersAll SET UP menu parameters Reverse 50GBSide Middle51GB SettingsLOW HighAll Surround menu parameters 52GBAdvanced Surround menu parameters 53GB Advanced Level menu parameters 54GBAll Level menu parameters Test Tone Front LIRAll EQ menu parameters 55GBAdvanced EQ menu parameters Narr 56GBWide Installer mode Custom install mode12V Trig mode 57GB58GB Naming preset stations FunctionsSelecting the speaker System Using the Sleep Timer59GB Select Sleep from the Receiver menu60GB RecordingRecording on an audio tape or MiniDisc For example, insert a CD into the CD player61GB Using the Control A1 systemControl A1 /S-LINK control system 62GB If you have a Sony CD changer with a Command Mode selectorControl A1 hookup ConnectionsAutomatic function selection 63GBBasic Functions Synchronized recording Using S-LINK Control S system64GB DVD 65GBReceiver When using as a simplified remote Using the remote RM-US105ACommand mode has been changed Press AV System 2 while the button blinks67GB Listening to the sound in another room2ND Room OUT 3RD Room OUTRM-US105A 68GB2nd room operation Operations using the remote STR-DA7ES only Command mode has been set to the 3rd room mode69GB 3rd room operationCommand mode buttons ?/1 switch70GB Inserting batteries into the remote71GB Changing button assignments 72GBAdvanced remote operations 73GBTo clear all remote button assignments Hold Down USE MODE, then press ?/1Room OUT STR-DA7ES 74GB75GB PrecautionsTroubleshooting 76GB Troubleshooting77GB Remote controlAmplifier section Specifications78GB 79GB 2nd room 67-69 3rd room Index

STR-DA4ES specifications

The Sony STR-DA4ES is a high-performance AV receiver that has garnered attention from audiophiles and home theater enthusiasts alike. Launched during the early 2000s, this model represents a blend of advanced technology and user-friendly design, making it a popular choice for those seeking immersive audio and video experiences.

One of the key features of the STR-DA4ES is its impressive power output. With 110 watts per channel across seven channels, the receiver delivers ample amplification to fill large rooms with rich, dynamic sound. It supports multiple audio formats, including Dolby Digital, DTS, and the advanced DSD for high-resolution audio. This versatility ensures that users can enjoy various content, from movies to music, without compromising on audio quality.

The receiver is equipped with a highly sophisticated digital signal processor (DSP) that optimizes sound reproduction. The Digital Cinema Sound technology enhances the listening experience by simulating different acoustics, allowing for a more immersive experience. Among its highlighted features is the automatic speaker calibration system, known as "Digital Auto Calibration," which fine-tunes the audio setup based on room characteristics. This feature simplifies the installation process by automatically adjusting settings for optimal sound.

The STR-DA4ES also boasts a range of connectivity options, including multiple HDMI inputs and outputs, component video inputs, and various digital and analog audio inputs. This ensures seamless integration with a wide array of devices, from Blu-ray players to gaming consoles, facilitating a comprehensive home theater setup. Additionally, the presence of dual-zone functionality allows for separate audio output in different rooms, catering to various listening preferences.

Another noteworthy characteristic of the STR-DA4ES is its robust build quality and aesthetic appeal. With a sleek, modern design, the unit complements any home decor while featuring a user-friendly interface that makes navigating settings straightforward. The remote control is intuitive, providing quick access to essential functions and custom presets.

In summary, the Sony STR-DA4ES stands out for its powerful performance, advanced processing capabilities, and versatile connectivity options, making it an excellent choice for home theater enthusiasts. Whether you're watching movies, playing games, or listening to music, it promises a captivating audio experience that elevates any entertainment setup.
Top Page Image Contents