NEC 500, 700, 700M, 900 manual Side Jacks, Rear Panel Jacks, Microphone Operation

Controls –continued (AccuSync 700M)

Side Jacks

Headphone Jack	Automatically mutes the speaker volume
	when the headphones are plugged in.
Microphone Jack	Can be used instead of the built-in micro-
	phone.

Rear Panel Jacks

AUDIO	MIC.
IN	OUT

Audio In -Sky Blue	Connects to the *LINE OUT jack of the
	PC sound card.
Mic Out - Pink	Connects to the microphone jack of the
	PC sound card.

Microphone Operation

Using this jack reduces the length of cable needed to reach the PC's sound card. In order to use the MIC jack, use a cable (supplied) to plug into the rear of the monitor (MIC OUT) and into the MIC input jack of your sound card (if available).

*LINE OUT

A terminal used to connect to the speaker including a built-in amplifier (Amp). Make sure that the connecting terminal of the PC sound card is checked before connecting. If the Audio Out of PC sound card has only Speaker Out, reduce the PC volume. .

NOTE: If the Audio Out of the PC sound card supports both Speaker Out and Line Out, convert to Line Out using the card jumper of the program (Refer to the Sound Card Manual).

9

AS500700700M900FINAL2.p65 9 11/11/03, 1:45 PM