Monster Cable 300S warranty Setting Your Mount’s Adjustment Capabilities

Setting Your Mount’s Adjustment Capabilities

The SmartView 300S features a wide-angel swivel joint and all-directional OmniBall™ for fine-tuning the position of your display.

The swivel joint enables you to turn your display left or right 160°.*

The OmniBall allows you to pivot your screen any direction and rotate it 360°.

Before attaching your LCD TV to the four-point TV mounting plate, you can increase or decrease the OmniBall pivot action.

1)Slide the LCD TV mounting plate onto the wall plate as shown to the right.

2)By hand, remove the black plastic cap in the center of the mounting plate, revealing the OmniBall tension nut (13mm).

3)With a socket wrench (13mm or 1/2"), turn the tension nut clockwise to limit pivot and rotation.

4)Turn the nut counterclockwise to increase pivot and rotation.

Your mount’s wide-angle swivel joint also has an adjustable tension screw. It can be adjusted before or after your TV is attached to the TV mounting plate.

1)Remove the plastic cap on the top of the swivel joint to access its tension screw.

2)With the included Allen wrench, turn the tension screw counterclockwise to reduce tension of swivel.

3)Turn the screw clockwise to increase tension of swivel.

* Dependent on display size.

12