Monster Cable 400S warranty Installing the FlatScreen Mount

Installing the FlatScreen Mount

Remove all pieces of the FlatScreen Mount system to ensure you have all necessary parts.

Be sure to choose a mounting location with easy access to an AC power outlet.

Wood Stud Mounting:

1)Using an electronic stud sensor, locate a wall stud

at your desired mounting location.

�����

2) ����� With the help of a friend, position the wall plate over wall stud. Using the provided level, confirm that the wall plate is plumb or vertically straight. For best results, position the level horizontally with the narrow end flush against the side of the wall plate. Hold the plate firmly in place.

3) Mark the stud center in the top and bottom mounting holes with a pencil.

4) With your electrical drill and 3/16" bit, pre-drill a 3" deep hole at each mark.

5) Attach the wall plate to the wall using the supplied lag bolts and round washers, as shown to the right. Tighten each bolt with your electric drill or socket wrench. Turn clockwise until secure.

DO NOT over tighten bolts. This can damage

the wall plate or the surface of your wall.

8