Installing the FlatScreen Mount continued
Masonry Mounting
While masonry materials (bolts and concrete anchors) are included, masonry mounting requires specialized knowledge, skills and tools. Monster highly recommends that you seek the help of a professional installer when mounting to masonry.
DO NOT drill holes in masonry mortar joints.
1)With the help of a friend, position the mounting plate in your desired mounting location.
�����
2) ����� Using the provided level, confirm that the wall plate is plumb or vertically straight. Position the level horizontally with the narrow end flush against the side of the wall plate. Hold the plate firmly in place.
3) Mark the centers of the top and bottom mounting holes on the wall plate with a pencil. Be careful not to mark a mortar joint. With your electrical drill and 1/2" masonry bit,
4) Install the supplied plastic concrete anchors in each hole. Tap into hole until fully seated.
5) Attach the wall plate to the wall using the supplied lag bolts and round washers, as shown to the right.
DO NOT over tighten bolts. This can damage
the wall plate or the surface of your wall.
10