Rear Panel Jacks
Antenna Input
To switch between Cable and Air input, go to the Channel Manager option to change the signal source CABLE or AIR (see page 33).
Component: Y-PBPR and Audio Inputs
INPUTS 1 and 2 provide
NOTES • Your component outputs may be labeled Y,
•Your component outputs may be labeled
•It may be necessary to adjust TINT to obtain optimum picture quality when using the
•INPUT 1 and 2 (Y/VIDEO) can be used for composite video and component video input.
HDMI 1, 2 (High Definition Multimedia Interface) ABOUT HDMI – HDMI is the
interface for consumer
electronics. HDMI enables the secure distribution of uncompressed
HDMI, the HDMI logo and
NOTES • The HDMI input is not intended for use with personal computers.
•Only DTV formats such as 1080p, 1080i,
720p, 480i and 480p are available for HDMI input.
Optical Out (Digital Audio)
This jack provides Digital Audio Output from a HDMI source or digital program channel to your audio device that is Dolby® Digital and PCM compatible, such as an audio amplifier.
NOTE *Manufactured under license from Dolby Laboratories. “Dolby” and the
For Factory and Service Use Only
10