Hitachi 55HDT51, 42HDT51 Set Monitor Out, CableCARD Info, Set AV Control

SETUP

Set Monitor Out

This feature will select the source of the Monitor Output.

Setup

Menu Preference

Screen Saver

Set The Inputs

Set Black Side Panel

Set Closed Captions

Set Monitor Out

Move SEL Return

Setup
Set Monitor Out
Video Out
Monitor	Out
TV Tuner
Move SEL	Return

Monitor- Select Monitor to output the audio and video signals of the chosen input source (ANT A, ANT B, VID1-VID5) to a VCR or other A/V device.

TV Tuner Out- Select TV Tuner Out to output the audio and video signals of the last watched Antenna Source (ANT A, ANT B). Use CURSOR PAD G, H to highlight the function to change then press the SELECT button to select the function.

Press EXIT to quit menu or CURSOR PAD F to return to previous menu.

CableCARD Info

Select this feature to access your CableCARD ID and HOST ID. Please have this information ready when you call your cable operator (see also page 13).

Setup

CableCARD Info.

Set AV Control

Upgrades

Set Stand-By Mode

Move SEL Return

Setup

CableCARD Info.

Select the button below to access your CableCARD ID and Host ID.

CableCARD Info

Move SEL Select

Set AV Control

This feature will select the AV Control feature. Set this feature if you want to control some of the TV functions from an external home control system.

DISPLAY

Setup

CableCARD Info.

Set AV Control

Upgrades

Set Stand-By Mode

Move SEL Return

Setup

Set AV Control

If you want to use the AV Control function, please set the RS232C.

Connected RS232C

Move SEL Return

ON-SCREEN

Use the CURSOR PADS and the SELECT button to check the Connected RS232C box.

NOTE: For use with third party home Audio/Video control systems which are commercially available. Please see your dealer regarding these “non Hitachi” home control systems.

76