TV Guide On Screen
Screen 11:
Are the settings correct ?
If Yes the TV Guide setup is complete, then press SELECT button to continue.
If No please make the necessary changes in order to complete the TV Guide setup procedure.
Screen 14:
None of the Hitachi codes appeared to control your VCR. What would you like to do now ?
1.- Try VCR configuration again to repeat the setup. 2.- Try alternate remote codes to see other code
alternatives that may solve the problem.
3.- Skip this step , will finish the TV Guide setup ; but will show an incomplete setup for your VCR.
Screen 12:
This shows that the setup procedure is complete Use the CURSOR PAD and to highlight Next or if you are like to make changes select Back ; Then press SELECT button to continue or finish.
Screen 13:
When a CODE for a VCR is not accepted then the following message will appear. Check the setup as mentioned then select Next.
NOTE: 1. The LCD TV should be in standby mode in order to continually receive updated program listings from your cable company.
2.If using a Cable box, please leave it ON to continually receive updated program listings from your cable company.
For using and navigating the TV Guide On Screen System please refer to the TV Guide Instruction Book.
51