Hitachi 37HLX99 important safety instructions Set The Inputs, Auto, Remote, Off

Setup

Set The Inputs

Use this feature to give a name to any of the five video inputs.

1.	Press the CURSOR PAD	or	to highlight the
	video inputs.
2.	Press the CURSOR PAD	or	to select your
	choices.

Note: The inputs labeled Gray out (Skip) or Hide (Skip) are disabled in the INPUTS selection.

OR

Setup

Set The Menu Options

Set The Power Saving

Set The Inputs

Set The Closed Captions

Set The Output Terminals

Set The Quick Start Options

Reset The Software

Move SEL Select

On-Screen Display

INPUT 4 Auto Link
	Setup
Use this function to automatically turn the TV on and
	Set The Inputs
tune to INPUT 4 when it detects a video signal to
	Input1	:	*
INPUT 4.	Input2	:	*
	Input3	:
			*
	Input4	:	*
1. Use the CURSOR PAD , , or to	Auto Link :		Off
	Input5	:	*
highlight and select the AUTO LINK setting of
	Move		SEL Return
your choice.

-Auto

When AUTO is selected, the TV will turn on and switch to INPUT 4 automatically, when the INPUT 4 input device is turned on. This is

convenient when you want to watch a movie with your VCR, laserdisc player or DVD player.

-Remote

When REMOTE is selected, the TV will turn on and switch to INPUT 4 automatically when the INPUT 4 input device is turned on and the VCR, laserdisc, or DVD play button on your remote control is pressed. This is convenient when you want to record a movie with your VCR and watch it later.

-Off

Select OFF to disable this function.

2.Press EXIT to quit menu or select SET THE INPUTS to return to previous menu.

NOTE: 1. Once the TV has been turned on using the AUTO LINK feature, it must be reset before AUTO LINK is used again. To do this, turn your VCR, laserdisc, or DVD player OFF. This feature is now reset and will turn on your TV as described above.

2.When using REMOTE mode, any remote control button will substitute for your video input device play button. However, intended operation is for use with your VCR, laserdisc, or DVD play button.

3.If no remote control button is pressed after the TV is turned on by AUTO LINK, the TV will automatically turn off after three hours.

Set AV NET

64