Antenna connections
If you are using an indoor or outdoor antenna, follow the instructions below that correspond to your antenna system. If you are using a Cable TV service, see Cable TV connections.
Combination VHF/UHF Antenna (Single 75 ohm cable)
Antenna | Connect the 75 ohm cable from the combination VHF/UHF antenna to the antenna jack. |
Jack |
|
75 ohm Coaxial Cable
Cable TV connections
This TV has an extended tuning range and can tune most cable channels without using a Cable TV Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled. Descrambling these signals for normal viewing requires the use of a descrambler device which is generally provided by the Cable TV company.
For subscribers to basic Cable TV service
For basic Cable TV service not requiring a Converter/Descrambler box, connect the
Antenna75 ohm Coaxial Cable directly to the Antenna Jack on the back of the TV.
Jack
75 ohm Coaxial Cable
For subscribers to scrambled Cable TV service |
|
| |
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect the incoming 75 ohm Coaxial | |||
Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable, connect the output jack of the Converter/Descrambler | |||
box to the Antenna Jack on the TV. Follow the connections shown below. Set the TV to the output channel of the Converter/Descrambler | |||
box (usually channel 3 or 4) and use the Converter/Descrambler box to select channels. |
| ||
|
|
| Antenna |
Incoming 75 ohm Cable TV Cable | Converter/ | 75 ohm Cable to TV | Jack |
| |||
| Descrambler |
|
|
For subscribers to unscrambled Cable TV service with scrambled premium channels
If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require the use of a Converter/ Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from the Cable TV company or an electronics supply store). Follow the connections shown below. With the switch in the “B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the “A” position, tune your TV to the output of the Converter/Descrambler box (usually channel 3 or 4) and use the Converter/Descrambler box to tune scrambled channels.
Incoming |
| Converter/ |
|
|
|
75 ohm |
|
|
| Antenna | |
| Descrambler |
|
| ||
Cable TV |
|
|
| 75 ohm Cable to TV | Jack |
Cable | Splitter | A/B Switch | A |
| |
| B |
|
IMPORTANT NOTICE
The nationwide switch to digital television broadcasting will be complete on June 12, 2009, but your local television stations may switch sooner. After the switch,
Information about the DTV transition is available from your local television stations, www.DTV.gov, or
Hitachi supports the DTV transition and as a member of the DTV Transition Coalition urges consumers to visit these web sites for interactive guides and further detailed information:
• www.dtvtransition.org
• www.myceknowhow.com
• www.dtv2009.gov
12
3AQ0201A_eng.indd 12
5/4/10 3:28:05 PM