Hitachi LE19S304 important safety instructions Reception disturbances

Page 24

Reception disturbances

IGNITION NOISE:

Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances.

GHOSTS:

Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects. Changing the direction or position of the antenna may improve reception. Ghosting may also be caused by defects in the antenna system such as unshielded leads or connecting several sets to the same antenna without using multiple antenna couplers.

SNOW:

If your receiver is located in the fringe area of a television station where the signal is weak, your picture may be marred by the appearance of small dots. When the signal is extremely weak, it may be necessary to install a special antenna to improve the picture.

RADIO FREQUENCY INTERFERENCE:

The interference produces moving ripples or diagonal streaks, and in some cases, causes loss of contrast in the picture.

PREVENTION OF AN OBSTACLE TO RADIO RECEIVERS

This television has been designed pursuant to the FCC class B Rules. This is to prevent a problem to

Radio receivers. If this television causes a problem to Radio receivers, then take the following steps:

Keep the television away from Radio.

Adjust Radio antennas in order for the television not to receive interference.

The antenna cable of Radio should be kept away from the television.

Use a coaxial cable for antenna.

You can check if this television influences Radio receivers by turning off all other equipment other than the television. If you find a problem receiving Radio when using the television, check the instructions mentioned above.

BLOCK NOISE or FREEZE (DIGITAL INPUT):

Fuzzy blocks may appear in some area or the whole area of the screen. This is usually caused by interference from automobile ignition systems, neon lamps, electrical drills, ghosting of the image and lost or weak receiving signals.

BLACK SCREEN:

When using an antenna, weak signals will display a black screen. It may be necessary to upgrade your antenna.

NOTE:

• The TV set can generate sound distortion in external devices such as a radio. Please separate radio equipment from the TV set to a considerable distance.

24

3AQ0201A_eng.indd 24

5/4/10 3:28:16 PM

Image 24
Contents LCD Hdtv Location of the required Marking Energy StarImportant Safety Instructions Power source HOW to Handle the LCD PanelDeclaration of Conformity CondensationChild Safety Notice Safety Precautions Securing to a WallHow to attach the stand How to remove the standFeatures Power sourceTo USE AC Power Contents Before using your unitLocation of controls Left side FrontRight side RearRemote control Battery PrecautionsCH Channel / Buttons Press to change Channels of the LED TVCable TV Ohm Cable to TV Jack Splitter Switch Antenna connectionsCable TV connections Ohm Cable to TV JackTo select the video input source To Select Analog ChannelsTo Select Digital Channels EnterQuick guide for menu operation Example Select LanguageIcon Selected Items Setup hint Convenience functionsMemorizing channels Checking the digital signal strength Setting the Parental ControlLabeling channels Labeling video inputsTo change the password To set the Parental ControlDownloading the additional Parental Control rating system Aspect Switching Closed CaptionCC advanced Opacity FlashingNative for PC mode only NaturalCinema Wide1 for 43 format programs Cinema Wide2 for letter box programsConnections to other equipment To connect the LED TV to a VCRTo connect to a DVD player with Component Video Input VCRUsing an AV Amplifier with built-in digital surround To connect a Hdmi or a DVI device to the unitTo return to normal mode To connect the TV to a camcorder, or a TV GameMonitor Display modes Reception disturbances Troubleshooting Symptoms Possible SolutionsSpecifications AccessoriesGeneral TelevisionOrion SALES, INC 3471 N. Union DR