Connections to other equipment | (continued) |
To connect the TV to a camcorder, or a TV Game
To play back from a camcorder, connect the camcorder to the unit as shown.
This unit can also be used as a display device for many video games. However, due to the wide variety of signals generated by these devices and subsequent
Rear of the unit
To VIDEO/AUDIO INTo Video/Audio OUT
Video/Audio cable (not supplied) | or |
|
ENGLISH
To connect the TV to a PC (Personal Computer)
Before you connect this TV to your PC, change the adjustment of your PC’s Resolution and Refresh rate (60 Hz). Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the VGA connector PC MONITOR IN on the rear of the TV. Attach the connectors firmly with the screws on the plug. In case of a Multimedia computer, connect the audio cable to the audio output of your Multimedia computer and to the AUDIO connector of the PC/DVI AUDIO IN jack of the TV.You can also connect the PC with HDMI cable. If you use a HDMI cable, you don’t have to connect the audio cable. If you use a
Press INPUT on the remote control to select PC mode.
Switch on the computer. The TV can operate as the computer monitor.
Rear of the unit
To
PC/DVI
AUDIO
IN
To PC |
| To HDMI IN |
MONITOR | HDMI cable (not supplied) | |
IN |
| |
| VGA cable (not supplied) | |
Audio cable (not supplied) | ||
Monitor Display modes
MODE | Resolution | Refresh rate |
VGA | 640x480 | 60/ 72/ 75 Hz |
VGA | 720x400 | 70Hz |
SVGA | 800x600 | 56/ 60/ 72/ 75 Hz |
XGA | 1024x768 | 60/ 70/ 75 Hz |
WXGA | 1280x768 | 60Hz |
WXGA | 1280x720 | 60Hz |
WXGA | 1360x768 | 60Hz |
To return to normal mode
Press INPUT again.
NOTE:
• The
• If there is no video signal from the PC when the unit is in PC mode, “No signal” will appear on the TV screen.
23
3AQ0201A_eng.indd 23
5/4/10 3:28:15 PM