Switching The TV ON/OFF, Initial Settings

Switching The TV ON/OFF

To switch the TV on:

Your TV will switch on in two steps:

1- Connect the power cord to the system. Press Power ON/OFF switch. Then the TV switches itself to stand-by mode (optional).

2- To switch on the TV from stand-by mode either:

Press a digit button on the remote control so that a programme number is selected, or Press the "-P/CH" or "P/CH+" button on the TV or press the P+ or P- button on the remote control, so that last mode switched off is selected.

By either method the TV will switch on.

To switch the TV off:

•Press the “ (stand-by)” button on the remote con- trol or On/Off switch on the TV, so the TV will switch to stand-by mode.

To power down the TV completely, press On/Off switch

or,

Unplug the power cord from the mains socket.

Navigating the Menu System

For Displaying	MENU	GUIDE
Menu Options		For Navigation
		For Navigation
		OK
	FUNCTION	RETURN
	+
		To Confirm Choices

1- Press to display the menu.

2- Press  or  button to select an icon. Press OK or “” to view the menu settings.

3- Use  or  button to highlight. Press  for more options in analogue TV mode. Use OK in DTV mode for viewing a submenu.

4- Press  or  buttons to change the settings. Press OK to set as default.

5- To exit the menu or return from sub-menu screen, press .

These explanations are available for the navigation of the whole Menu System. To select options that are explained in the following parts, refer to “Navigating The Menu System”.

Initial Settings

When the TV is turned on for the first time, it is in the digital mode.

Because this is the first time the TV is used, there are no channels stored in the memory and the following message appears on the screen.

Please ensure aerial is plugged in. Do you want to start first time installation?

Yes

•To start installation process, select “Yes”, to cancel select “No”.

•To select an option “Yes or No”, highlight the item by using or buttons and press the OK button.

The IDTV will automatically tune to the UHF transmision channels 21 to 68 looking for digital terrestrial TV broad- casts and displaying the names of channels found. This process will take about five minutes. To cancel

searching, you can press the button at any time during the process.

AUTOMATIC SEARCH

Channels:

BBC ONE

BBC TWO

BBC CHOICE

Searching UHF channels 30. Please wait. This will take a few minutes

12 %

MEN U Cancel search

After Automatic Search process is completed, the following message asking for analogue channel search appears on the screen. TV switches to the analogue TV mode.

Do you want to search for analogue channels?

Yes		No

Downloaded From TV-Manual.com Manuals

English - 10 -