i portant note before starting Auto Setup
If you have a Video Cassette Recorder or a Satellite receiver connected to your TV please ensure that they are switched on before automatic tuning begins. In the case of a VCR, insert a
start A.P.S. (Auto Progra | ing Syste ) |
1
2
3
4
5
When the TV is turned on for the first time, it is in the digital mode. Because this is the first time the TV is used, there are no channels stored in the memory and the following message appears on the screen.
To start installation process, select “Yes”, to cancel select “No”.This process will take about five minutes. To cancel searching, you can press “
” button at any time during the process.
After Automatic Search process is completed, a message asking for analogue channel search appears on the screen. To continue Auto Program,
first set the language, country and teletext language by using / } button and then press the RED or “OK” button
After APS is finalized, the programme table will appear on the screen. In the programme list you will see the programme numbers and names assigned to the programmes.
For details, please refer to the Install Menu section of the instruction book.
Please ensure aerial is plugged in. Do you want to start first time installation?
Yes No
AUTOMATIC SEARCH
Channels:
BBC ONE
BBC TWO
BBC CHOICE
Searching UHF channels 30. Please wait. This will take a few minutes
12 %
MENU Cancel searching
AUTO PROGRAM
LanguageEnglish
Country | UK |
Text language | West |
APS is running...
Cancel
i portant note.
Once the TV has found all your local stations, they are then automatically assigned a programme numberand name, if available from the broadcast.
If you would like to change the programme number or order, please refer to the Program Menu
DownloadedsectionFromof