There you can set/reset locking for the Main Menu, or the Installation Menu to restrict access. If the menu lock is disabled, there will be free access to the menu system. Also in this menu you can change the lock key and set/change parental lock mode.
Disabled: All menus are unlocked.
Main Menu: Main menu is accessible only with the correct lock key. So the user cannot add, delete, re- name, move channels, cannot set timers.
Installation: Installation menu is locked, so the user cannot add channels.
Changes will be updated after exiting Configuration Menu.
Timers
You can set a timer to switch the TV to any channel without your intervention. This is also for making video recordings of programmes when you are out.
Display the Main Menu by pressing the 
button.
Highlight the Timers line by pressing 
or 
button and press the OK button to display the Timer menu.
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
Up to five separate timer events can be set and each is displayed in the Timer screen, showing the event number, the channel to be selected, the start time, end time, date and the mode - whether that event is active (and will be acted on) or not.
TIMER MENU
No Channel Name | Start | End | Date | Mode | |
1. | ITV 1 | 20:00 | 21:00 12/05/2005 | Active | |
2. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive |
3. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive |
4. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive |
5. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive |
6. | BBC ONE | 00:00 | 00:00 | 01/01/2005 | Inactive |
| Toggle Mode | MENU Exit SELECT | Edit Timer | i More | |
• To set an event, highlight its mode button using the
or 
button and press the OK button to display the timer entry window.
Name: | 3. ITV 1 |
Start: | 00:00 |
End: | 00:00 |
Date: | 03/06/2005 |
Mode: | Once |
•Here the five settings of channel name, start time, end time, date and frequency mode can be set. You can move freely between each setting using the 
or 
buttons.
•The channel name is set using the 
or 
button to display the channel which broadcasts the programme.
•The start time, end time and date are each set with the digit buttons on the remote control in
•The frequency mode determines how often the receiver operates this event and is set with the 
or 
button to be either Once, Daily, or Weekly.
If an invalid number for the start or end times or the date is entered, “Entered time is not valid” message appears on the menu.
If timer action occurs while the TV is watched, the TV switches to the selected channel. When timer ex- pires, the TV switches to the channel which it is switched from.
Selected digital channel will be output via
RECORDINGFROMIDTV
Connect your VCR to
Set the
Set the time as described above.
Set your TV to standby using the remote control.Set your VCR to correspond with the time set on your TV and select external input (refer to your VCR instruc- tion book).
NB. If you switch on your TV whilst the timer record- ing is active and then switch back to standby, the timer recording will be cancelled; the timer setting will be deleted and the desired programme will not be recorded.
Language
Some programmes are broadcast in two or more lan- guages simultaneously. The language heard can be selected from the Language Menu.
• Press the 
button to display the Main Menu and use
Downloaded From
English - 18 -