By moving the cursor in four directions you can reach 20 programmes in the same page. You can scroll the pages up or down by pressing the navigation buttons to see all the programmes in TV mode (except the AV mode). By cursor action, programme selection is done automatically.
Name:
To change the name of a decided programme, se- lect the programme and press the RED button.
The first letter of the selected name will be high- lighted. Press / button to change that letter and
/ button to select the other letters. By pressing the RED button, you can store the name.
Insert:
Select the programme which you want to insert by navigation buttons. Press the GREEN button. By navi- gation buttons move the selected programme to the decided programme space and press the GREEN button again.
Delete:
To delete a programme, press the YELLOW button. Pressing the YELLOW button again erases the se- lected programme from the programme list, and the programmes below shift one up.
APS (Auto Programming System)
When you press the BLUE button for APS, Auto Programming System Menu will appear on the Screen.
PROGRAM
CountryGermany
A.P.S. (Auto Programming System) Country
Press / button to select your country. If you want to exit from A.P.S. function, press the BLUE button.
When you press OK or RED button for starting APS, all stored programs will be erased and the following screen will be displayed:
APS is running...
Cancel
Whenever you press the BLUE button, A.P.S. func- tion stops and Program Table appears on the screen.
If you wait until the end of A.P.S., Program Table is displayed with the programmes found and located.
Install menu in AV modes
The following screen appears in the install menu:
INSTALL
Colour System | AUTO |
VCR | Off |
Store Program |
|
Colour System
By pressing / select Colour System. By pressing / button, you can change the colour system to PAL, SECAM, PAL 60, NTSC 4,43, NTSC 3,58 or AUTO.
VCR
By pressing / select VCR. By pressing / button, you can set the VCR to ON or OFF.
Store Program
By pressing / button, select Store Program. Press or OK button to store the adjustments. “Pro- gram Stored” will be displayed on the screen.
Source menu
By pressing / button, select the sixth icon and press or OK button. Source menu appears on the screen.
Downloaded From
English - 23 -