Hitachi UT32A302 manual Setup Operation, How to Use the Remote to Control your External Devices

Page 26

SETUP OPERATION

How to Use the Remote to Control your External Devices

OPERATING THE PRECODED FUNCTIONS FOR YOUR EXTERNAL DEVICES.

The new remote control is designed to operate different types of VCRs, cable boxes, set-top-boxes, satellite receivers, DVD players, and other audio/video equipment. You must first program the remote to match the remote system of your external equipment (refer to pages 29 ~ 30 for precodes).

EXTERNAL DEVICE CONTROL SETUP PROCEDURE

1.Turn on your external device.

2.Select the desired device mode DVD, PVR/VCR, SAT/CBL or AVR by pressing the corresponding device button.

3.Hold down the device button (DVD, PVR/VCR, SAT/CBL or AVR) on the remote and enter the four digit preset code that matches your device as shown on pages 29 ~ 30 .

4.Release the device button.

5.If done correctly, the device LED indicator will blink 3 times to confirm proper setup.

6.The remote will now control the desired device.

SETUP EXAMPLE (Hitachi Cable Box with precode 0003)

1.Turn ON your Cable box.

2.Select Cable mode by using your SAT/CBL button to position the LED indicator on SAT/CBL.

3.Hold down the SAT/CBL button on the remote and press the numbers 0, 0, 0 and 3.

4.Release the SAT/CBL button.

5.The indicator light will flash 3 times if the code was accepted.

6.Aim the remote at the cable box and press the POWER button. The remote will turn off your cable box when the correct four digit preset code is entered. When this occurs, the remote control is programmed for your cable box. If the cable box does not turn off, try a different four digit preset code.

7.The remote will now control your Cable box.

Repeat the same procedure for your set-top-box or satellite receiver (select SAT/CBL), your DVD (select DVD), your VCR/PVR(select VCR/PVR), or your AVR (select AVR).

NOTE

Power button

Device buttons

Numeric buttons

Remote Control Backlight Feature

When you press any remote control button, the buttons will light up. The illumination will light a few seconds during this time. The buttons will appear to light if the

room is dark.

Disabling Remote Control Backlight Feature

1.Place the RC in TV mode.

2.Press and HOLD the TV mode key.

3.While holding the TV mode key enter ASPECT, MUTE in sequence.

4.To re-enable the backlight feature do steps 1~3 again (these steps toggle the Backlight Feature on and off, default is ON).

If your external device cannot be operated after performing the above procedures, your external device code has not been precoded into the remote.

In the unlikely event that your external device cannot be operated after performing the above procedures, please consult your external device operating guide.

The remote control will remember the codes you have programmed even after the batteries are removed from the remote control. To reset all programmed codes to factory default place remote control in TV mode, then press and hold TV mode key and enter “9”, “8”, “1” in sequence.

25

Image 26
Contents Hitachi UltraVision Hdtv Monitor Contents Important Safety Instructions EnglishDeclaration of Conformity Important Safety InstructionsLead/Mercury Notice ModificationsAbout This Manual FeaturesIntroduction Trademark CreditsOther Symbols Safety PrecautionsExplanation of the Symbols Do not remove covers, or modify the productSafety Precautions Do not handle the power cord with wet hands Do not install the unit near medical devicesConnect the power plug securely Do not pull the cord when you unplug the power cordCleaning and Maintenance Anti-tumble Measures Safety Precautions Main Unit InstallationFasten the fastening strap to a table using Securing to a tableTune Into Safety Safety Precautions Child Safety NoticeAbout the Installation Safety Precautions Wall Mount SetupSpecification is shown below Remove the Stand Base from the MonitorTabletop stand Safety Precautions Floor Stand SetupInstall the Monitor on the Floor Stand Connection 18 ~ Supplied Accessories including optionQuick Start Guide Insert the Batteries into the Remote Power OnQuick Start Guide ControlFront Panel Component NamesMain Unit Rear PanelComponent Names Remote Control Open the battery compartment cover Remote Control Battery InstallationHandling the Remote Control Install the batteriesConnection Connect Power Cord to the Rear PanelConnecting to Equipment Having Hdmi or DVI Output Terminals Connect your Equipment to the MonitorConnecting to Equipment Having Video Output Terminals Connection Connect your Equipment to the MonitorAttach the supplied cushion around the Hdmi cable Connecting to a PCAttach Cushion, Secure with Clamps and Fit Terminal Cover Connection Connect the Power Plug into the Wall SocketSecure the Hdmi cable and power cord with clamps Fit the terminal cover onto the monitorTo turn Off the power to the unit Power On/OffTo turn On the power to the unit Basic OperationBasic Operation Volume Up/Down MuteBasic Operation Input Switching to Hdmi and RGB Input Signal Screen DisplaySetup Example Hitachi Cable Box with precode Setup OperationHow to Use the Remote to Control your External Devices Remote Control Backlight FeaturePrecoded Cable BOX buttons Exclusive TV mode Monitor buttonsMY Cable BOX Code is Precoded SET-TOP-BOX/SATELLITE buttonsPrecoded VCR/PVR buttons MY DVD Player Code is MY VCR/PVR Code isPrecoded DVD buttons Precoded AVR buttons Exclusive TV mode buttonsCode is Setup Operation Remote Control Codes Cable BrandEnglish Select Language How to Use the On-Screen Display OSD SystemHow to set Language Basic OperationSetup Operation Main Menu List MenuSetup Operation Watching Images from HDMI/Composite Input Setting Picture Adjustment3D Color Management Contrast ModeColor Temp. Adjust Black EnhancementReducing Noise DNRFilm Mode Making the Moving Image SmoothRGB Input Advanced SettingSelected Items Setup hint Video Power Save Color SystemSetup Operation Viewing Images from a PC Picture MenuClock Phase Setup MenuAuto Adjust Selected Items Setup hint Frequency DisplayFunction Aspect SwitchingHDMI/Composite Signal Input Display AspectUsing a wide-screen monitor Function Aspect SwitchingHDMI/Composite Signal Input Position Adjustment RGB Signal Input Display AspectWhen RGB Input is Selected Function Power Save ModeWhen HDMI/Composite Input is Selected Symptom and Checklist TroubleshootingWhen the Following Messages Appear on the Screen About LCD Display Technology46 ~ Troubleshooting Symptom and ChecklistSymptoms Try Auto Adjust Stripes appear and some Product Specifications SpecificationHdmi connector pin specifications Product Specifications Signal InputRGB terminal D-sub 15 pin connector Pin Input signalWith RGB input Product Specifications Recommended Signal ListWith Hdmi input Product Specifications Dimensions Unit Inch/mmCustomer Record Service InformationOperational, hook up Warranty questions for your product Hitachi Limited WarrantyConditions of Hitachi Limited Warranty Visit our website and register your product onlineEND User License Agreement for Hitachi Software END User License Agreement for Hitachi Software
Related manuals
Manual 53 pages 50.95 Kb

UT32A302, UT32A302W specifications

The Hitachi UT32A302W and UT32A302 are advanced flat panel LCD televisions that stand out in the competitive market of home entertainment. Combining cutting-edge technology with aesthetic design, these models are designed to enhance the viewing experience while providing reliable and efficient performance.

One of the key features of both models is their high-definition display capabilities. With a resolution of 1366 x 768 pixels, the UT32A302W and UT32A302 deliver sharp and vibrant images that bring movies, television shows, and video games to life. Whether you’re watching a thrilling action sequence or a serene landscape, the picture quality remains outstanding.

In terms of connectivity, both televisions come equipped with multiple HDMI inputs, allowing users to connect various devices such as gaming consoles, Blu-ray players, and streaming devices effortlessly. Additionally, they include USB ports for easy access to multimedia files, facilitating a seamless viewing experience from personal devices.

The Hitachi UT32A302W and UT32A302 also boast innovative technologies that enhance the overall performance. With a high contrast ratio, these televisions render deeper blacks and brighter whites, which significantly improves the viewing experience, especially in low-light conditions. The advanced color enhancement technology ensures that images are displayed with excellent accuracy, providing a more immersive experience.

Energy efficiency is another highlight of these models. They are designed to minimize power consumption without sacrificing performance, making them an eco-friendly choice for consumers. The slim design and lightweight structure allow for easy installation, whether mounted on a wall or placed on a stand.

User-friendly features such as an intuitive remote control and on-screen menus make navigating through settings and channels a breeze. The televisions also support various formats and codecs, enabling users to enjoy a wide array of content without compatibility issues.

In summary, the Hitachi UT32A302W and UT32A302 are strong contenders in the television market, offering high-definition display quality, versatile connectivity options, and advanced technologies that elevate the viewing experience. They are ideal for anyone looking to upgrade their home entertainment system with reliable and stylish options.