Hitachi UT32A302W manual Setup Operation Watching Images from HDMI/Composite Input

SETUP OPERATION (continued)

Watching Images from HDMI/Composite Input

1.Connect to external equipment. (See 18 and 19 for details.)

2.Press the or button to switch to HDMI mode.

Press the or button to switch to Composite mode.

3.Press the button.

Setting Picture Adjustment

You can adjust the display condition such as color settings.

Select "Picture" from Menu list.

Picture
Picture Mode		Dynamic
Contrast		+31
Brightness		–31
Color		0
Sharpness		+15
Tint		0
Color Temperature		Normal
Back Light		+20
Reset		Reset
Select	OK Set	Return

Picture				Dynamic
				Normal
	Contrast Mode
	3D Color Management			Off
	Black Enhancement			Off
	DNR			Off
	MPEG NR			Off
	Film Mode			Off
	3D Comb Filter			Off
	Reset			Reset
	Select		Set	Return
		OK

Picture	Dynamic
Color Temp. Adjust
Select OK Set	Return

Selected Items

Setup hint

Dynamic

You can make the best selection from 3 modes depending

Picture Mode

on the lighting condition and intended use.

Natural

Dynamic: Suitable for brighter conditions.

Natural

: Suitable for normal lighting conditions.

Cinema

Cinema : Suitable for watching movies.

This adjusts the contrast to meet the surrounding

brightness by using the

◄►

button.

extended up to [+40] by pressing

Contrast

-31~+31

The maximum value is

the

button for more than 2 seconds at [+31]. The

(+32~+40)

value

between [+32] ~ [+40] appears in magenta. This is

the special feature for dark images, so it is recommended

to set the value less than [+31] under normal conditions.

Brightness

-31~+31

Adjust brightness according to personal preference by

using the

◄►

button.

Color

-31~+31

Adjust color according to personal preference by using the

◄►

button.

Sharpness

-15~+15

Preferred sharpness can be adjusted by pressing the

button for softer image or the

button for sharper image.

Tint

-31~+31

Pressing the

button enhances red and weakens green,

while pressing the

button weakens red and enhances

green. The setup hint is to adjust for realistic skin color.

Cool

You can select from 3 settings depending on the color

Color Temperature

Normal

condition using the

◄►

button.

Warm

Back Light

-20~+20

Adjust the brightness of the Back Light for maximum

visibility.

Reset

Each item on this menu screen can be restored to the

factory settings by pressing the

OK button.

33