![](/images/new-backgrounds/1125041/12504165x1.webp)
SETUP OPERATION (continued)
Main Menu List
|
|
| Menu | Page |
| Picture Mode |
| Select between 3 picture modes according to the lighting condition. | 33 |
| Contrast |
| Adjust to increase or decrease the picture contrast. | 33 |
| Brightness |
| Adjust to brighten or darken the picture. | 33 |
| Color |
| Adjust to increase or decrease the color density. | 33 |
| Sharpness |
| Adjust to sharpen or soften the picture. | 33 |
| Tint |
| Adjust to obtain natural skin color. | 33 |
| Color Temperature |
| Select between 3 settings according to your preferred color tone. | 33 |
| Back Light |
| Adjust to increase or decrease the brightness of back light on LCD panel. | 33 |
Picture | Reset |
| Reset each item on the menu screen to the factory setting. | 33 |
(HDMI/Composite) | Contrast Mode |
| Select between 3 contrast modes to suit your preference. | 34 |
| 3D Color Management |
| Adjust the suitable tint, color density, and brightness on image. | 34 |
| Black Enhancement |
| Adjust the black level compensation. | 34 |
| DNR |
| Reduce noise for picture signal. | 35 |
| MPEG NR |
| Reduce mosquito noise in the picture. | 35 |
| Film Mode |
| Adjust to make the moving image smooth. | 36 |
| 3D Comb Filter |
| Reduce the color blurring to reproduce purer color. | 34 |
| Reset |
| Reset each item on the menu screen to the factory setting. | 34 |
| Color Temp. Adjust |
| Set specific adjustment in each of 3 color temperature modes. | 34 |
| Contrast |
| Adjust to increase or decrease the picture contast. | 38 |
| Brightness |
| Adjust to brighten or darken the picture. | 38 |
| Color |
| Adjust to increase or decrease the color density. | 38 |
Picture(RGB) | Tint |
| Adjust to obtain natural skin color. | 38 |
Color Temperature |
| Select between 3 settings according to your preferred color tone. | 38 | |
|
| |||
| Color Temp. Adjust |
| Set specific adjustment in each of 3 color temperature modes. | 38 |
| Back Light |
| Adjust to increase or decrease the brightness of back light on LCD panel. | 38 |
| Reset |
| Reset each item on the menu screen to the factory setting. | 38 |
| Treble |
| Adjust to increase or decrease the level of treble. | - |
| Bass |
| Adjust to increase or decrease the level of bass. | - |
| Balance |
| Adjust the balance of sound from the bottom right and left speakers. | - |
| Surround |
| Select | - |
Audio | Bass Boost |
| Enhance bass sounds. (Off/On) | - |
| Clear Voice |
| Select clearer and more realistic sounds. (Off/On) | - |
| Perfect Volume |
| Adjust sound volume appropriately. (Off/On) | - |
| Speakers |
| Select if using internal speakers. (Off/On) | - |
| Reset |
| Reset each item on the menu screen to the factory setting. | - |
| System |
| This function is not available. | - |
|
| Auto Input Change | In response to the connected equipment (such as DVD) through HDMI cable, the | 19 |
|
| monitor is automatically turned On and switched to HDMI input. | ||
Function |
|
|
| |
HDMI Control | System Standby | In response to the monitor, the connected equipment (such as DVD) through HDMI | 19 | |
| cable is automatically turned Off (standby mode). | |||
|
|
|
| |
|
| AV Center Control | Selecting On will activate AV Center OSD interface, in case you purchased the optional | 19 |
|
| Hitachi A/V Center. | ||
|
|
|
| |
Setup | Video Power Save |
| Save power consumption when no signal can be input in HDMI/Composite input mode. | 42 |
RGB Input |
| Select the effective signal. | 37 | |
(HDMI/Composite) |
| |||
Color System |
| Select color system. | 37 | |
|
| |||
| Auto Adjust |
| Adjust Horizontal Position, Vertical Position, Horizontal Clock, and Clock Phase | 39 |
|
| automatically. | ||
|
|
|
| |
| Horizontal Position |
| Adjust the display position horizontally. | 39 |
| Vertical Position |
| Adjust the display position vertically. | 39 |
| Horizontal Clock |
| Minimize the vertical stripes on the screen. | 39 |
Setup(RGB) | Clock Phase |
| Minimize the blurring of the letters and stripes on horizontal row. | 39 |
| Reset |
| Reset each item on the menu screen to the factory setting. | 39 |
| Frequency Display |
| Set On for PC signal frequency information to be displayed on the Input Signal Screen | 39 |
|
| Display. | ||
|
|
|
| |
| WXGA Mode |
| Select the resolution when WXGA signal is received. | 39 |
| RGB Input |
| Select the effective signal. | 39 |
Language | - |
|
| 31 |
NOTE
The picture settings can be stored for each of inputs except “Picture Mode”.
ENGLISH
32